Appleton® KPCHL1575J5GMT Mercmaster III 250 KP Series HID Luminaire With 8 in NEMA 5 Glass Refractor and Globe Guard, 188 W Fixture
Explosion Proof Outdoor Lighting
722326
MFG #: KPCHL1575J5GMT
Appleton™
2131.55000
/ ea
- Amperage Rating: 2/1.15/1/0.85 A Starting, 1.7/0.95/0.85/0.72 A Operating
- ARRA Compliant: N
- Ballast Type: HX-HPF
- Buy American Compliant: N
- Catalog Number: KPCHL1575J5GMT
- Country of Origin: MX
- Currency: USD
- Dimensions: 12.06 in W
- Enclosure Type: NEMA 4X/IP66
- EU RoHS Indicator: C
- Gross Weight Per Pack: 26.2500 lb
- Gross Weight per Pack Metric: 11.91
- Gross Weight UOM Metric: kg
- Height: 13.50 in
- Height [Metric]: 34.2900 cm
- Housing Material: Cast Copper-Free Aluminum
- Lamp Base Type: Mogul
- Lamp Wattage: 150 W
- Length: 24.20 in
- Length [Metric]: 61.4680 cm
- Lens Type: Prismatic Glass
- Lumens: 16000 Lumens
- Mounting Type: Pendant Cone Hood
- Series: KP Series
- Type: Enclosed Gasketed
- UNSPSC: 39111524
- UPC 11: 78138111294
- UPC 12: 781381112949
- Width: 16.40 in
- Width [Metric]: 41.6560 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Fixture Wattage: 188 W
- Housing Finish: Epoxy Powder Coated
- Lamp Type: High Pressure Sodium
- Voltage Rating: 120 to 277 VAC
- Features
| Modular design allows scores of fixture component combinations to meet installation and lighting needs and many most-used combinations are offered prewired and assembled, complete with lamp, packaged in a single carton and ready to install |
| Choice of heat-resistant prismatic glass refractors (NEMA distributions I, III and V), or heat-resistant prismatic glass globes for hazardous area fixtures |
| Colored and clear polycarbonate globes and Tuff-skin® coated glass globes are available but are NOT approved for use in classified areas |
| Fixtures with these globes do NOT comply with code requirements, and should be used in non-classified areas only |
| Globes and refractors thread directly into ballast housing |
| Mounting hoods include cone-shaped pendant hood, standard pendant, flexible pendant, ceiling and wall pendants (tapped for 3/4 in or 1 in NPT), 25 deg angle stanchion, and 90 deg (straight) stanchion (both tapped for 1-1/4 in or 1-1/2 in NPT) |
| Cone hood fixtures for pendant mounting shed dust, dirt and combustible fibers, cone hood inhibits build-up that "insulates" fixture and slows heat transfer, and provides increased surface area for more effective heat dissipation |
| Reflector choice includes standard dome and 30 deg angle types, both made of fiberglass reinforced white polyester, highly resistant to unusually corrosive applications |
| Reflectors are vented for cooler, dirt-free operation and maintained lumen output, they secure to ballast housing with stainless steel screws threading into stainless steel inserts |
| For high corrosion resistance, fixture housing, mounting hoods and guards are copperfree cast aluminum with baked epoxy finish, electrostatically applied for uniformity, all exposed hardware is stainless steel |
| Hinge has high lip for added safety during installation and servicing |
| Body gaskets and globe gaskets are high temperature silicone rubber, capacitors are non-PCB type, thermally isolated from ballast |
| Mogul base porcelain socket with nickel plated contacts has 200 deg C (392 deg F) welded leads, prewired to the ballast, assures trouble-free operation in installations where high ambient temperatures are encountered |
| HPS ballasts are high power factor (min PF 90%) |
| For electrical protection, a ground wire is provided on each Mercmaster to bond hood and ballast housing |
| Copperfree cast aluminum (less than 4/10 of 1%) mounting hoods, ballast bodies and guards |
| Stainless steel, latch assemblies have stainless steel bolt and captive nut; reflectors and guards attach with stainless steel screws threading into stainless steel inserts exposed hardware, white polyester reflector |
| 1 hub |
| 3/4 in NPT hub |
| 60 Hz frequency |