Leviton® ODC0P-D0W Low Voltage Dimming Photocell, White

Low Voltage Photocontrols
881392 MFG #: ODC0P-D0W
Leviton®
148.32000 / ea
  • ARRA Compliant: C
  • Buy American Compliant: C
  • Catalog Number: ODC0P-D0W
  • Color: White
  • Country of Origin: CN
  • Currency: USD
  • Dimensions: 2.51 in Dia x 0.99 in H
  • Environmental Conditions: 32 to 131 deg F Operating Temperature
  • EU RoHS Indicator: C
  • Gross Weight Per Pack: 0.2400 lb
  • Gross Weight per Pack Metric: 0.11
  • Height: 2.75 in
  • Length: 2.88 in
  • Mounting: Ceiling/Wall
  • Sensitivity: 32 to 1722 fc
  • Standard: UL 916 Listed
  • Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantASHRAE 90.1FCC CompliantIECC RatedTitle 24 and NYCLL48UL 916
  • Supply Voltage: 12-24 VDC
  • Type: Photocell
  • UNSPSC: 45111808
  • UPC 11: 07847770507
  • UPC 12: 078477705070
  • Width: 2.25
  • Width [Metric]: 5.7150
  • Stock Status: NONSTOCK
  • Brand: Leviton®
  • Manufacturer: Leviton Manufacturing Co., Inc.
  • Mounting Type: Ceiling
  • Voltage Rating: 12 to 24 VDC
The Leviton® ODC0P-D0W is an interior low voltage photocell capable of continually dimming between 1-10VDC based on the amount of natural light contribution. It is a low power, high-sensitivity mini-daylight harvesting system for precise monitoring of either task or ambient light levels. The ODC0P-D0W's digital onboard microprocessor adjusts light levels by mimicking the spectral response of the human eye for single zone dimming. The ODC0P-D0W uses patented daylighting design level (DDL) technology for precise load dimming that maintains desired light level. Ideal for existing retrofits and daylight harvesting applications, the ODC0P-D0W can be used with 1 to 10 VAC sinking loads types and is a cost-effective solution when paired with dimming drivers/ballasts.
QTY
  • Features
Dimming Low Voltage
Dimmed lighting at a desired daylight design level offers greater energy savings and comfort and improved energy efficiency
Leviton® exclusive, patented auto-calibration eliminates the need for configuring labor costs during daylight harvesting configuration
Industry exclusive "fail safe" circuitry in the event of product failure, return to closed feature causes the relay to default ON which eliminates life safety concerns
Fade rate time setting 3 to 30 min
Controls 1 to 10 VAC sinking ballast, no additional power supply required for 1 to 10 VAC sinking operation
Dim to OFF over DDL for 30 sec then lights OFF, test mode 30 sec fade rate for 15 min then auto exit
Provides ultra convenient, hands free lighting control
Measures light from any source in the visible spectrum within a 60 deg cone at 8 to 12 ft H mounting
Provides continual measurements to control the lighting
Mounts on ceiling, surface mount or low profile flush mount
LED status indicators for ease of installation