Appleton® MLBG70LMT ML Series Ballast Body, High Pressure Sodium Lamp, 70 W Lamp, 120/208/240/277 VAC, 13.38 in W

Ballast Bodies
334553 MFG #: MLBG70LMT
Appleton™
876.72000 / ea
Appleton_MBL100_120
  • Amperage Rating: 0.9/0.5/0.44/0.35 A Starting, 0.82/0.48/0.41/0.36 A Operating A
  • Application: For Globe
  • ARRA Compliant: N
  • Ballast Type: High Reactance High Power Factor Autotransformer (HX-HPF)
  • Buy American Compliant: N
  • Catalog Number: MLBG70LMT
  • Color: Gray
  • Country of Origin: MX
  • Currency: USD
  • EU RoHS Indicator: C
  • Finish: Epoxy Powder Coated
  • Gross Weight Per Pack: 8.1700 lb
  • Gross Weight per Pack Metric: 3.71
  • Gross Weight UOM Metric: kg
  • Height: 7.60 in
  • Height [Metric]: 19.3040 cm
  • Length [Metric]: 30.9880 cm
  • Material: Cast Copper Free Aluminum
  • Number Of Lamps: 1
  • Series: ML Series
  • Standard: Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, AEx nA nR IIC (Z2); Class I, Zone 2, Ex nR IIC (Z); Class I, Zone 2, AEx nR IIC (ZB); Class II, Division 1 And 2, Groups E, F, G; Class III; UL 1598A, 60079-15, 844; CSA LR25428
  • Standards: RoHS Compliant
  • Sub Brand: Mercmaster III
  • Suitable For Use With: Glass Refractor
  • Temperature Rating: 104 to 149 °F
  • Type: HPF
  • UNSPSC: 39111524
  • UPC 11: 78138163377
  • UPC 12: 781381633772
  • Wattage: 94 W
  • Width [Metric]: 31.7500 cm
  • Stock Status: NONSTOCK
  • Brand: Appleton™
  • Manufacturer: Appleton
  • Lamp Type: Medium Base High Pressure Sodium
  • Lamp Wattage: 70 W
  • Length: 12.20 in
  • Voltage Rating: 120/208/240/277 VAC
  • Width: 12.50 in
Appleton® Ballast Body, Series: ML Series, High Pressure Sodium Lamp, 70 W Lamp, 94 W, 120/208/240/277 VAC, 0.36 A, 40 to 65 deg C, For Use With: Glass Globe/Polymeric Refractor, 13.38 in Width, 3.04 in Height, Aluminium, Baked Epoxy Clad, Gray
QTY
Add to Wishlist
  • Applications
  • Features
For Globe
The Mercmaster III series provides a wide selection of high quality enclosed and gasketed luminaires for use in demanding industrial environments and hazardous locations; Compact light weight low profile design is suited for low mounting heights in conjunction with lower wattage fixtures; Modular design allows scores of fixture component combinations to meet installation and lighting needs; Hinge has high lip for added safety during installation and servicing; Hinge and bolt construction ensures 360 DEG compression at all points on ballast housing gasket for positive sealing; Swing away design of captive bolt and nut simplifies servicing; Fixtures are for use in Class I, Zone 2 hazardous locations; For marine and wet locations, a wide range of industrial, chemical processing and other areas where flammable gases and vapors or combustible dusts are present under conditions defined by the National Electrical Code, areas of low clearance, low ceiling heights or where fixture weights must
The Mercmaster™ III series provides a wide selection of high quality enclosed and gasketed luminaires for use in demanding industrial environments and hazardous locations
60 Hz frequency
Cast copperfree (4/10 of 1% max) aluminum with electrostatically applied baked gray epoxy clad finish ballast body
90% minimum power factor
For electrical protection, a ground wire is provided on each Mercmaster to bond hood and ballast housing
Mounting hoods, bodies and guards are cast copperfree (4/10 of 1% max) aluminum with electrostatically applied baked gray epoxy clad finish
Heat-resistant prismatic glass globe and refractor, thread directly into the ballast housing and seal against a high temperature silicone rubber gasket
Hinge and bolt construction assures 360 deg compression at all points on ballast housing gasket for positive sealing