Appleton® EDSC1129 Contender® EDS Feed Through Tumbler Switch Control Station, 120/277 VAC, 20 A, NEMA 3/7CD/9EFG

Tumbler-Snap Switch Control Stations
456356 MFG #: EDSC1129
Appleton™
436.99000 / ea
  • Actuator: Front Operated
  • Application: For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present
  • ARRA Compliant: N
  • Buy American Compliant: N
  • Catalog Number: EDSC1129
  • Country of Origin: MX
  • Currency: USD
  • Enclosure: NEMA 3, 7CD, 9EFG
  • EU RoHS Indicator: N
  • Gross Weight Per Pack: 9.7500 lb
  • Gross Weight per Pack Metric: 4.42
  • Gross Weight UOM Metric: kg
  • Height: 3.60 in
  • Height [Metric]: 9.1440 cm
  • Length: 7.20 in
  • Length [Metric]: 18.2880 cm
  • Mounting: Surface Mount With 1/2 IN Feed-Thru Hub
  • Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Division 1, Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2, Groups E, F, G, Class III
  • Standards: Class I, Division 1 Groups C D, Class I, Division 2 Groups B C D, Class II, Division 1 And 2 Groups E F G, Class III, UL 894, UL 1203, E10523, E81751 UL Listed
  • Sub Brand: Contender
  • Type: EDSC Series 1-Gang Tumbler Switch
  • UNSPSC: 39121565
  • UPC 11: 78138169718
  • UPC 12: 781381697187
  • Width: 5.20 in
  • Width [Metric]: 13.2080 cm
  • Stock Status: NONSTOCK
  • Brand: Appleton™
  • Manufacturer: Appleton
  • Amperage Rating: 20 A
  • Voltage Rating: 277 VAC
QTY
  • Applications
  • Features
For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present
Corrosion resistant, pad lockable in the on or off position; Enclosures have external mounting lugs for ease of mounting; Smooth, rounded integral bushing in each hub protects conductor insulation; Enclosures furnished with internal ground screw; Smooth ground mating surfaces assure flame-tight joint between cover and mounting enclosure; Stainless steel hex head cap screws for attaching cover to mounting enclosure; Each handle has close-tolerance threaded stainless steel shaft to meet explosionproof requirements; Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads; On/off legend marking
Corrosion resistant, pad lockable in the on or off position
Enclosures have external mounting lugs for ease of mounting
Smooth, rounded integral bushing in each hub protects conductor insulation
Enclosures furnished with internal ground screw
Smooth ground mating surfaces assure flame-tight joint between cover and mounting enclosure
Stainless steel hex head cap screws for attaching cover to mounting enclosure
Each handle has close-tolerance threaded stainless steel shaft to meet explosion proof requirements
Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads
1/2 in hub
1-gang
1 hp at 120 VAC, 2 hp at 240 VAC
Nylon 6/6 handle
Triple-coat (zinc electroplate, chromate and epoxy powder coat)
Snap switch
On/off