APPLETON EDSC271SA3/4 SINGLE GANG EDSC UNILET, EXPLOSION PROOF, DUST-IGNITION PROOF
Explosion Proof Control Stations
1304365
MFG #: EDSC271SA
Appleton™
63.79000
/ ea
- Application: For Use With Contender Series Tumbler Switches, CPS 20 AMP Factory Sealed Receptacles And CPP Plugs, U-Line 20 AMP Receptacles, Division 2 Contender Series
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: EDSC271SA
- Country of Origin: MX
- Currency: USD
- EU RoHS Indicator: N
- Gross Weight Per Pack: 2.2200 lb
- Gross Weight per Pack Metric: 1.01
- Gross Weight UOM Metric: kg
- Height: 4.80 in
- Height [Metric]: 12.1920 cm
- Length: 7.60 in
- Length [Metric]: 19.3040 cm
- Material: Aluminum
- Mounting: Lugs
- Standard: UL 508, 698, 1203, UL File Number E10449, E81751
- Sub Brand: Division 2 Contender
- Type: 1-Gang Feed Thru Mounting Body
- UNSPSC: 39131708
- UPC 11: 78138169818
- UPC 12: 781381698184
- Width: 5.60 in
- Width [Metric]: 14.2240 cm
- Stock Status: NORMALLY STOCKED
- Brand: Appleton™
- Manufacturer: Appleton
Push buttons and selector switches are used in conjunction with contactors or magnetic starters for remote control of motors. They provide circuit control and/or selection. Pilot lights provide visual assurance that an electrical function is being performed at a remote or local location. Confine arcing of device within the enclosure, preventing ignition of ignitable atmospheres during control operation of motors and other equipment. Used in classified areas where flammable vapors, gasses or highly combustible dusts are present. For installation in: chemical plants, petrochemical plants, refineries, other process industries, where corrosive elements are present
- Catalog URL(Catalog URL)
- http://www.appletonelec.com(Seller Home Page URL)
- https://www.emerson.com/(Seller Home Page URL)
- Install Instructions URL(Install Instructions URL)
- Spec Sheet URL - 11043_SPE_781381698832_Spec.pdf(Spec Sheet URL)
- Spec Sheet URL - SPE_781381698832_Spec.pdf(Spec Sheet URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Warranty URL - appleton-grp-llc-warranty-en-us-6761036.pdf(Warranty URL)
- Applications
- Features
| For Use With Contender Series Tumbler Switches, CPS 20 AMP Factory Sealed Receptacles And CPP Plugs, U-Line 20 AMP Receptacles, Division 2 Contender Series |
| Finish is epoxy powder coat for enhanced corrosion resistance; Large backbox for ample wiring room; Ground screw installed in bodies for ground continuity; Corrosion resistant stainless steel hex head captive screws hold covers to body; Factory sealed enclosure eliminates need for adding sealing fittings and compound at each conduit entrance; Accurately tapped, tapered hubs for tight rigid joints and ground continuity |