Appleton® FM7™ Unilet® LL57 Type LL Conduit Body, 1-1/2 in Hub, 7, 28 cu-in, Grayloy Iron, Tri-Coated

Type LL Conduit Fitting Body
299526 MFG #: APPLL57
Appleton™
78.35000 / ea
  • Application: For Use With Rigid Steel, Rigid Aluminum Conduit And IMC
  • ARRA Compliant: Y
  • Buy American Compliant: C
  • Catalog Number: APPLL57
  • Color: Gray
  • Connection: Tapered Female Threaded
  • Connection Type: Tapered FNPT
  • Country of Origin: MX
  • Currency: USD
  • Dimensions: 7.13 in L x 3.5 in W x 3.69 in H
  • Enclosure: NEMA FB-1
  • EU RoHS Indicator: C
  • Gross Weight Per Pack: 2.20 lb
  • Gross Weight per Pack Metric: 1.00
  • Gross Weight UOM Metric: kg
  • Height: 4.00 in
  • Height [Metric]: 10.16 cm
  • Length: 9.50 in
  • Length [Metric]: 24.13 cm
  • Mounting Type: Surface
  • Number of Hubs: 2
  • Standard: UL 514A, UL 514B, UL File Number E2527, CSA C22.2 No. 18.3, CSA 065183, NEMA FB-1
  • Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL 514AUL 514B File No. E2527CSA C22.2 No. 18.3/065183
  • Sub Brand: UNILETS
  • Type: Type LL
  • UNSPSC: 39131708
  • Width: 4.00 in
  • Width [Metric]: 10.16 cm
  • Stock Status: NONSTOCK
  • Brand: Appleton™
  • Manufacturer: Appleton
  • Hub Size: 1-1/2 in
  • Form: Form 7
  • Capacity: 28 in³
  • Material: Grayloy Iron
  • Finish: Triple Coated
FM7 Unilet conduit bodies provide plenty of room for pulling cables and wiring connections. Accurately tapped tapered threads ensure tight, rigid joints and excellent ground continuity.
QTY
  • Applications
  • Features
For Use With Rigid Steel, Rigid Aluminum Conduit And IMC
Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; Completely interchangeable with Crouse-Hinds Form 7 bodies, gaskets and covers; Equivalent FM7 and Form 7 units have identical applications and installation dimensions; Flat back design provides greater cubic content for easier wire pulling and more room for splicing; Fits flush and snug against flat surfaces for more stable installation; Smooth hub openings allow easy conduit joining; Hub size, body style, compliance data, maximum wire number/size and cubic capacity molded into body; Wiring
Smooth, rounded integral bushing in each hub protects conductor insulation
Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity
Wedge-Lok™ form-in-place covers with integral gasket are approved for use in wet locations, grayloy iron bodies with cast covers and gasket are approved for use in wet locations
Unique Wedge-Lok™ clip cover design allows easy removal at any later time, without damaging the conduit body and cover is secured with clips, not screws
Completely interchangeable with Crouse-Hinds Form 7™ bodies, gaskets and covers
Equivalent FM7™ and Form 7™ units have identical applications and installation dimensions
Flat back design provides greater cubic content for easier wire pulling, and more room for splicing
Fits flush and snug against flat surfaces for more stable installation
Smooth hub openings allow easy conduit joining
Hub size, body style, compliance data, maximum wire number/size and cubic capacity molded into body
For use with rigid steel, rigid aluminum and IMC conduit
Allow connections for branch runs, permit access to conductors for maintenance
Left side access opening
Triple coated (zinc electroplated, chromate and epoxy powder coated)