or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
YG-1
YG-1 EH108, JET-POWER NON-CENTER CUTTING REGULAR LENGTH SQUARE END ROUGHING END MILL, 3/8 IN DIA CUTTER, 3/8 IN SHANK
YG-1
YG-1 EH108, JET-POWER NON-CENTER CUTTING REGULAR LENGTH SQUARE END ROUGHING END MILL, 3/8 IN DIA CUTTER, 3/8 IN SHANK
SKU920217
MFGR #95067
Your Cost: $43.61/ea
List: YG-1 Roughing End Mill, Non-Center Cutting Regular Length Square End, Series: EH108, Jet-Power, 3/8 in Cutter Dia, 2-1/2 in Overall Length, 1 in Maximum Depth of Cut, 3 Flutes, 3/8 in Shank Dia, Right Hand Cutting, 50 deg Helix Angle, Flat Shank, 1-1/2 in Shank Length, Solid Micro Grain Carbide, TiAIN Coated
YG-1 Roughing End Mill, Non-Center Cutting Regular Length Square End, Series: EH108, Jet-Power, 3/8 in Cutter Dia, 2-1/2 in Overall Length, 1 in Maximum Depth of Cut, 3 Flutes, 3/8 in Shank Dia, Right Hand Cutting, 50 deg Helix Angle, Flat Shank, 1-1/2 in Shank Length, Solid Micro Grain Carbide, TiAIN Coated
Application Steel, Stainless Steel Catalog Number 95067 Country of Origin KR Cut Type Center Cutting Direction Right Hand Gross Weight Per Pack 0.1300 lb Helix Angle 50 ° Material Carbide Maximum Depth of Cut 1 in Series EH108 Shank Length 1-1/2 in Shank Style Flat Shank Type Flat Type Carbide, 3 Flute 50° Helix Regular Length Stock Status NONSTOCK Brand YG-1 Manufacturer YG-1 U.S.A. Cutter Diameter 0.375 in Finish TiALN Length of Cut 1 in Number of Flutes 3 Overall Length 2.5 in Shank Diameter 0.375 in Steel, Stainless Steel Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings 50 deg helix offers increased cutting action compared to end mills with lower helix angle Number of flutes varies by diameter for optimum feed and cut rate Carbide can run at higher speeds than high speed or cobalt steel, resisting wear and high cutting temperatures Corner protection against chipping For low hardness materials(under HRc45), alloy steels, tool steels, carbon steels, prehardened steels, stainless steels, etc
content loaded
content loaded
content loaded
content loaded
- Attributes
- Applications
- Features
- Substitute Products
| Application | Steel, Stainless Steel |
| Catalog Number | 95067 |
| Country of Origin | KR |
| Cut Type | Center |
| Cutting Direction | Right Hand |
| Gross Weight Per Pack | 0.1300 lb |
| Helix Angle | 50 ° |
| Material | Carbide |
| Maximum Depth of Cut | 1 in |
| Series | EH108 |
| Shank Length | 1-1/2 in |
| Shank Style | Flat |
| Shank Type | Flat |
| Type | Carbide, 3 Flute 50° Helix Regular Length |
| Stock Status | NONSTOCK |
| Brand | YG-1 |
| Manufacturer | YG-1 U.S.A. |
| Cutter Diameter | 0.375 in |
| Finish | TiALN |
| Length of Cut | 1 in |
| Number of Flutes | 3 |
| Overall Length | 2.5 in |
| Shank Diameter | 0.375 in |
| Steel, Stainless Steel |
| Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings |
| 50 deg helix offers increased cutting action compared to end mills with lower helix angle |
| Number of flutes varies by diameter for optimum feed and cut rate |
| Carbide can run at higher speeds than high speed or cobalt steel, resisting wear and high cutting temperatures |
| Corner protection against chipping |
| For low hardness materials(under HRc45), alloy steels, tool steels, carbon steels, prehardened steels, stainless steels, etc |