or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
YG-1 07584 E5021 Center Cutting Regular Length Single End Square End End Mill, 3/8 in Dia Cutter, 3/8 in Shank, 4 Flutes
YG-1 07584 E5021 Center Cutting Regular Length Single End Square End End Mill, 3/8 in Dia Cutter, 3/8 in Shank, 4 Flutes
SKU683393
MFGR #07584
Your Cost: $22.79/ea
List: YG-1 End Mill, Center Cutting Regular Length Single End Square End, Series: E5021, 3/8 in Cutter Dia, 2-1/2 in Overall Length, 1 in Maximum Depth of Cut, 4 Flutes, 3/8 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Plain Shank, 1-1/2 in Shank Length, Solid Micro Grain Carbide, Uncoated
YG-1 End Mill, Center Cutting Regular Length Single End Square End, Series: E5021, 3/8 in Cutter Dia, 2-1/2 in Overall Length, 1 in Maximum Depth of Cut, 4 Flutes, 3/8 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Plain Shank, 1-1/2 in Shank Length, Solid Micro Grain Carbide, Uncoated
Application Steel Catalog Number 07584 Country of Origin KR Cut Type Center Cutting Direction Right Hand Gross Weight Per Pack 0.1400 lb Helix Angle 30 ° Material CARBIDE Maximum Depth of Cut 1 in Series E5021 Shank Length 1-1/2 in Shank Type Plain Type 4 FLUTE REGULAR LENGTH Stock Status NONSTOCK Brand YG-1 Manufacturer YG-1 U.S.A. Cutter Diameter 0.375 in Finish Bright Length of Cut 1 in Number of Flutes 4 Overall Length 2.5 in Shank Diameter 0.375 in Steel Four flutes produce a better finish than fewer flutes Carbide can run at higher speeds than high speed or cobalt steel, resisting wear and high cutting temperatures Uncoated (bright) tool s have no additional surface treatment or coating for use on a broad range of materials Square nose end mills (also called square end) create sharp, unrounded cuts For general purpose machining on hardened and high alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon and abrasive plastic
content loaded
content loaded
content loaded
content loaded
- Attributes
- Applications
- Features
- Substitute Products
| Application | Steel |
| Catalog Number | 07584 |
| Country of Origin | KR |
| Cut Type | Center |
| Cutting Direction | Right Hand |
| Gross Weight Per Pack | 0.1400 lb |
| Helix Angle | 30 ° |
| Material | CARBIDE |
| Maximum Depth of Cut | 1 in |
| Series | E5021 |
| Shank Length | 1-1/2 in |
| Shank Type | Plain |
| Type | 4 FLUTE REGULAR LENGTH |
| Stock Status | NONSTOCK |
| Brand | YG-1 |
| Manufacturer | YG-1 U.S.A. |
| Cutter Diameter | 0.375 in |
| Finish | Bright |
| Length of Cut | 1 in |
| Number of Flutes | 4 |
| Overall Length | 2.5 in |
| Shank Diameter | 0.375 in |
| Steel |
| Four flutes produce a better finish than fewer flutes |
| Carbide can run at higher speeds than high speed or cobalt steel, resisting wear and high cutting temperatures |
| Uncoated (bright) tool s have no additional surface treatment or coating for use on a broad range of materials |
| Square nose end mills (also called square end) create sharp, unrounded cuts |
| For general purpose machining on hardened and high alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon and abrasive plastic |