or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
YG-1 07556TF E5021 Center Cutting Regular Length Single End Square End End Mill, 3/32 in Dia Cutter, 1/8 in Shank, 4 Flutes
YG-1 07556TF E5021 Center Cutting Regular Length Single End Square End End Mill, 3/32 in Dia Cutter, 1/8 in Shank, 4 Flutes
SKU683379
MFGR #07556TF
Your Cost: $9.89/ea
List: YG-1 End Mill, Center Cutting Regular Length Single End Square End, Series: E5021, 3/32 in Cutter Dia, 1-1/2 in Overall Length, 3/8 in Maximum Depth of Cut, 4 Flutes, 1/8 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Plain Shank, 1-1/8 in Shank Length, Solid Micro Grain Carbide, Tylon TiAlN Futura
YG-1 End Mill, Center Cutting Regular Length Single End Square End, Series: E5021, 3/32 in Cutter Dia, 1-1/2 in Overall Length, 3/8 in Maximum Depth of Cut, 4 Flutes, 1/8 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Plain Shank, 1-1/8 in Shank Length, Solid Micro Grain Carbide, Tylon TiAlN Futura
Application Steel Catalog Number 07556TF Country of Origin KR Cut Type Center Cutting Direction Right Hand Gross Weight Per Pack 0.0200 lb Helix Angle 30 ° Material Carbide Maximum Depth of Cut 3/8 in Series E5021 Shank Length 1-1/8 in Shank Type Plain Type 4 FLUTE REGULAR LENGTH Stock Status NONSTOCK Brand YG-1 Manufacturer YG-1 U.S.A. Cutter Diameter 0.0938 in Finish YG Tylon F Length of Cut 0.375 in Number of Flutes 4 Overall Length 1.5 in Shank Diameter 0.125 in Steel Four flutes produce a better finish than fewer flutes Carbide can run at higher speeds than high speed or cobalt steel, resisting wear and high cutting temperatures Uncoated (bright) tool s have no additional surface treatment or coating for use on a broad range of materials Square nose end mills (also called square end) create sharp, unrounded cuts For general purpose machining on hardened and high alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon and abrasive plastic
content loaded
content loaded
content loaded
content loaded
- Attributes
- Applications
- Features
- Substitute Products
| Application | Steel |
| Catalog Number | 07556TF |
| Country of Origin | KR |
| Cut Type | Center |
| Cutting Direction | Right Hand |
| Gross Weight Per Pack | 0.0200 lb |
| Helix Angle | 30 ° |
| Material | Carbide |
| Maximum Depth of Cut | 3/8 in |
| Series | E5021 |
| Shank Length | 1-1/8 in |
| Shank Type | Plain |
| Type | 4 FLUTE REGULAR LENGTH |
| Stock Status | NONSTOCK |
| Brand | YG-1 |
| Manufacturer | YG-1 U.S.A. |
| Cutter Diameter | 0.0938 in |
| Finish | YG Tylon F |
| Length of Cut | 0.375 in |
| Number of Flutes | 4 |
| Overall Length | 1.5 in |
| Shank Diameter | 0.125 in |
| Steel |
| Four flutes produce a better finish than fewer flutes |
| Carbide can run at higher speeds than high speed or cobalt steel, resisting wear and high cutting temperatures |
| Uncoated (bright) tool s have no additional surface treatment or coating for use on a broad range of materials |
| Square nose end mills (also called square end) create sharp, unrounded cuts |
| For general purpose machining on hardened and high alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon and abrasive plastic |