or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
YG-1
YG-1 04176 E1031(4SRS) Center Cutting Regular Length Single End Square End End Mill, 1 in Dia Cutter, 1 in Shank, 4 Flutes
YG-1
YG-1 04176 E1031(4SRS) Center Cutting Regular Length Single End Square End End Mill, 1 in Dia Cutter, 1 in Shank, 4 Flutes
SKU683353
MFGR #04176
Your Cost: $42.44/ea
List: YG-1 End Mill, Center Cutting Regular Length Single End Square End, Series: E1031(4SRS), 1 in Cutter Dia, 4-1/2 in Overall Length, 2 in Maximum Depth of Cut, 4 Flutes, 1 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Flat Shank, 2-1/2 in Shank Length, M2 HSS, Uncoated
YG-1 End Mill, Center Cutting Regular Length Single End Square End, Series: E1031(4SRS), 1 in Cutter Dia, 4-1/2 in Overall Length, 2 in Maximum Depth of Cut, 4 Flutes, 1 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Flat Shank, 2-1/2 in Shank Length, M2 HSS, Uncoated
Application Steel Catalog Number 04176 Country of Origin KR Cut Type End Cutting Direction Right Hand End Type Square End Gross Weight Per Pack 0.9200 lb Helix Angle 30 ° Material HSS Maximum Depth of Cut 2 in Series E1031 Shank Length 2-1/2 in Shank Type Flat Type 4 FL SE HSS, Regular Length Stock Status NONSTOCK Brand YG-1 Manufacturer YG-1 U.S.A. Cutter Diameter 1 in Finish Bright Length of Cut 2 in Number of Flutes 4 Overall Length 4.5 in Shank Diameter 1 in Steel When run in a counter clockwise direction (right hand cut) spiral fluted tool s evacuate chips up and out of the cut to reduce clogging High speed steel tool s are good for most general purpose applications, offering a combination of hardness and toughness for wear-resistance Uncoated tool s feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
content loaded
content loaded
content loaded
content loaded
- Attributes
- Applications
- Features
- Substitute Products
| Application | Steel |
| Catalog Number | 04176 |
| Country of Origin | KR |
| Cut Type | End |
| Cutting Direction | Right Hand |
| End Type | Square End |
| Gross Weight Per Pack | 0.9200 lb |
| Helix Angle | 30 ° |
| Material | HSS |
| Maximum Depth of Cut | 2 in |
| Series | E1031 |
| Shank Length | 2-1/2 in |
| Shank Type | Flat |
| Type | 4 FL SE HSS, Regular Length |
| Stock Status | NONSTOCK |
| Brand | YG-1 |
| Manufacturer | YG-1 U.S.A. |
| Cutter Diameter | 1 in |
| Finish | Bright |
| Length of Cut | 2 in |
| Number of Flutes | 4 |
| Overall Length | 4.5 in |
| Shank Diameter | 1 in |
| Steel |
| When run in a counter clockwise direction (right hand cut) spiral fluted tool s evacuate chips up and out of the cut to reduce clogging |
| High speed steel tool s are good for most general purpose applications, offering a combination of hardness and toughness for wear-resistance |
| Uncoated tool s feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications |
| Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment |