or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
Crouse-Hinds FSCT2 CONDULET CAST DEVICE BOX FOR THREADED RIGID AND IMC CONDUIT SINGLE GANG SHALLOW
Crouse-Hinds FSCT2 CONDULET CAST DEVICE BOX FOR THREADED RIGID AND IMC CONDUIT SINGLE GANG SHALLOW
SKU910456
MFGR #FSCT2
Your Cost: $96.09/ea
Conduit device boxes for installation in non-hazardous area conduit systems to accommodate wiring devices, act as pull boxes, or provide openings for taps and splices. Available in two box depths with a wide variety of hub configurations and sizes.
Conduit device boxes for installation in non-hazardous area conduit systems to accommodate wiring devices, act as pull boxes, or provide openings for taps and splices. Available in two box depths with a wide variety of hub configurations and sizes.
Catalog Number FSCT2 Dimensions 6-1/32 in H x 3-5/8 in W x 1-7/8 in D Gross Weight Per Pack 2.6250 lb Mounting Type Surface Suitable For Use With Threaded Rigid/IMC Conduit Type 3-Entry Type FSCT Shallow Tee UPC 11 78227441500 UPC 12 78227441500 Stock Status NONSTOCK Brand Crouse-Hinds Manufacturer Eaton Finish Electrogalvanized/Aluminum Acrylic Painted Material Feraloy Iron Alloy Number of Gangs 1 Trade Size 3/4 in Internal green ground screw standard on boxes Suitable for use in wet locations when used with gasketed covers Tapered threaded hubs with integral bushing Ample wiring room (1) side, (1) each end cable entry Available as shallow (FS) or deep (FD) configuration Ample wiring room provided in either FS or FD configuration Wide selection of surface or flush covers available in three materials Covers for flush mounting extend to conceal the rough plaster line Available in single gang and multi-gang configurations with hubs, and as blank bodies for drilled and tapped openings (1) side/(1) each end cable entry Accommodate wiring devices Act as pull boxes for conductors in a conduit system Provide openings to make splices and taps in conductors Provide access to conductors for maintenance and future system changes Connect conduit sections Electro galvanized/Aluminum Acrylic Painted finish
content loaded
content loaded
content loaded
- Attributes
- Documents & Resources
- Features
- Substitute Products
| Catalog Number | FSCT2 |
| Dimensions | 6-1/32 in H x 3-5/8 in W x 1-7/8 in D |
| Gross Weight Per Pack | 2.6250 lb |
| Mounting Type | Surface |
| Suitable For Use With | Threaded Rigid/IMC Conduit |
| Type | 3-Entry Type FSCT Shallow Tee |
| UPC 11 | 78227441500 |
| UPC 12 | 78227441500 |
| Stock Status | NONSTOCK |
| Brand | Crouse-Hinds |
| Manufacturer | Eaton |
| Finish | Electrogalvanized/Aluminum Acrylic Painted |
| Material | Feraloy Iron Alloy |
| Number of Gangs | 1 |
| Trade Size | 3/4 in |
| Internal green ground screw standard on boxes |
| Suitable for use in wet locations when used with gasketed covers |
| Tapered threaded hubs with integral bushing |
| Ample wiring room |
| (1) side, (1) each end cable entry |
| Available as shallow (FS) or deep (FD) configuration |
| Ample wiring room provided in either FS or FD configuration |
| Wide selection of surface or flush covers available in three materials |
| Covers for flush mounting extend to conceal the rough plaster line |
| Available in single gang and multi-gang configurations with hubs, and as blank bodies for drilled and tapped openings |
| (1) side/(1) each end cable entry |
| Accommodate wiring devices |
| Act as pull boxes for conductors in a conduit system |
| Provide openings to make splices and taps in conductors |
| Provide access to conductors for maintenance and future system changes |
| Connect conduit sections |
| Electro galvanized/Aluminum Acrylic Painted finish |