or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
Banner®
Banner Engineering SI-HG80DQD Interlock Switch, 250 VAC, 3 A, 1 Pole
Custom_Product_Images_Illustration
Banner®
Banner Engineering SI-HG80DQD Interlock Switch, 250 VAC, 3 A, 1 Pole
SKU59338
MFGR #SI-HG80DQD
Your Cost: $222.48/ea
List: Banner Engineering Interlock Switch, 250 VAC, 3 A, 1 Pole, NEMA 4/IP67, Zinc, 97 mm H x 72 mm W x 19 mm D
Banner Engineering Interlock Switch, 250 VAC, 3 A, 1 Pole, NEMA 4/IP67, Zinc, 97 mm H x 72 mm W x 19 mm D
Catalog Number SI-HG80DQD Country of Origin DE Dimensions 97 mm H x 72 mm W x 19 mm D Enclosure Type NEMA 4/IP67 Gross Weight Per Pack 0.8750 lb Material Zinc Number Of Poles 1 Standards cCSAus, CE Marked, RoHS Compliant UNSPSC 39122205 UPC 11 66248846731 UPC 12 66248846731 Stock Status NORMALLY STOCKED Brand Banner® Manufacturer Banner Engineering Corp. Amperage Rating 3 A Voltage Rating 250 VAC Safety switch is integrated and encapsulated into a load-bearing hinge, providing a high degree of protection from intentional defeat; Identical in appearance to non-switching blank hinge; Switch components concealed inside the hinge are protected from mechanical impact, providing superior performance to actuator-activated safety switches, rated IEC IP67; Hinge operates to a full 180 ° range of motion, safety switching point (guard-closed position) is adjustable over the full 0 - 180 ° operating range; Robust zinc die-cast housing is corrosion resistant; Short circuit protection: 6 AMP slow blow, 10 AMP fast blow, recommended external fusing or overload protection Safety switch is integrated and encapsulated into a load-bearing hinge, providing a high degree of protection from intentional defeat Identical in appearance to non-switching blank hinge Switch components concealed inside the hinge are protected from mechanical impact, providing superior performance to actuator-activated safety switches, rated IEC IP67 Hinge operates to a full 180 deg range of motion, safety switching point (guard-closed position) is adjustable over the full 0 - 180 deg operating range When properly interfaced or used with an appropriate controller, two SI-HG80D..switches can achieve safety category 4, per ISO 13849 (EN 954-1) Robust zinc die-cast housing is corrosion resistant 6 A slow blow, 10 A fast blow short circuit protection, recommended external fusing or overload protection Zinc die-cast 3 A at 250 VAC maximum, 0.5 A at 60 VDC maximum -25 to 70 deg C Operating 1 NO, 1 NC auxiliary contact configuration Flat actuator 1000000 operating cycles 4 pin micro-style quick disconnect connection With Load bearing hinge
content loaded
content loaded
content loaded
content loaded
- Attributes
- Documents & Resources
- Features
- Substitute Products
| Catalog Number | SI-HG80DQD |
| Country of Origin | DE |
| Dimensions | 97 mm H x 72 mm W x 19 mm D |
| Enclosure Type | NEMA 4/IP67 |
| Gross Weight Per Pack | 0.8750 lb |
| Material | Zinc |
| Number Of Poles | 1 |
| Standards | cCSAus, CE Marked, RoHS Compliant |
| UNSPSC | 39122205 |
| UPC 11 | 66248846731 |
| UPC 12 | 66248846731 |
| Stock Status | NORMALLY STOCKED |
| Brand | Banner® |
| Manufacturer | Banner Engineering Corp. |
| Amperage Rating | 3 A |
| Voltage Rating | 250 VAC |
| Safety switch is integrated and encapsulated into a load-bearing hinge, providing a high degree of protection from intentional defeat; Identical in appearance to non-switching blank hinge; Switch components concealed inside the hinge are protected from mechanical impact, providing superior performance to actuator-activated safety switches, rated IEC IP67; Hinge operates to a full 180 ° range of motion, safety switching point (guard-closed position) is adjustable over the full 0 - 180 ° operating range; Robust zinc die-cast housing is corrosion resistant; Short circuit protection: 6 AMP slow blow, 10 AMP fast blow, recommended external fusing or overload protection |
| Safety switch is integrated and encapsulated into a load-bearing hinge, providing a high degree of protection from intentional defeat |
| Identical in appearance to non-switching blank hinge |
| Switch components concealed inside the hinge are protected from mechanical impact, providing superior performance to actuator-activated safety switches, rated IEC IP67 |
| Hinge operates to a full 180 deg range of motion, safety switching point (guard-closed position) is adjustable over the full 0 - 180 deg operating range |
| When properly interfaced or used with an appropriate controller, two SI-HG80D..switches can achieve safety category 4, per ISO 13849 (EN 954-1) |
| Robust zinc die-cast housing is corrosion resistant |
| 6 A slow blow, 10 A fast blow short circuit protection, recommended external fusing or overload protection |
| Zinc die-cast |
| 3 A at 250 VAC maximum, 0.5 A at 60 VDC maximum |
| -25 to 70 deg C Operating |
| 1 NO, 1 NC auxiliary contact configuration |
| Flat actuator |
| 1000000 operating cycles |
| 4 pin micro-style quick disconnect connection |
| With Load bearing hinge |