nVent HOFFMAN SYSPEND™ VHDS36 VM3 Type 4X Corrosion-Resistant Machine Top Mount VHDS Motion Arm, For Use With SYSPEND™ HMI Enclosures, 25 to 75 lb Load Capacity, 304 Stainless Steel
Rack/Cabinet Miscellaneous Accessories
530612
MFG #: VHDS36
nVent HOFFMAN
6442.74000
/ ea
nVent HOFFMAN SYSPEND™ VHDS Motion Arm, Type 4X Corrosion-Resistant Machine Top Mount, Series: VM3, For Use With: SYSPEND™ HMI Enclosures, Specifications: 25 to 75 lb Load Capacity, 304 Stainless Steel, 10.18 in H x 40.65 in W x 4.86 in D Dimensions
- Compliance Cert URL - Hoffman_VHDPOST_Compliance_Certificate.pdf(Compliance Cert URL)
- http://www.hoffmanonline.com(Seller Home Page URL)
- Install Instructions 1 URL - 11015_2KOF510T6CM4JG8U.pdf(Install Instructions 1 URL)
- Install Instructions URL - stream_document.aspx?rRID=213948&pRID=206229(Install Instructions URL)
- Spec Sheet URL - Spec-00546.pdf(Spec Sheet URL)
- Install Instructions 1 URL - stream_document.aspx?rRID=213948&pRID=206229(Install Instructions 1 URL)
- Warranty URL - terms-of-sale(Warranty URL)
- Tech Drawing URL - 87948608.gif(Tech Drawing URL)
- Applications
- Features
| Controls and Drives; Corrosive Environments |
| Type 304 stainless steel construction, Gas spring counterbalance |
| Two arm lengths are available with field adjustable counterbalances to support loads up to 125 lb |
| No release handle is required to operate the arm |
| Maintains NEMA type 4 and 12 and IEC® IP66 enclosure rating when properly installed per Hoffman instructions |
| Corrosion-resistant stainless steel housing with provisions for water drainage from arm |
| 26 in arm supports loads of 45 to 125 lb with 13 in of vertical height adjustment |
| Field adjustable gas spring counterbalance allows the user to adjust lifting force by turning an adjustment mechanism under the arm |
| Angle of gas springs is adjustable (not the pressure), allows lifting force to be increased or decreased at any time for changes in load |
| Tension adjustment at front of the arm provides additional fine tuning of lifting force |
| No locking enclosure handle required, enclosure stays in place after repositioning |
| Easily interfaces with Hoffman HMI enclosures using a 60 x 60 mm enclosure mounting pattern |
| 1-1/4 in internal cable pathway maintains type 4, 4X and 12 enclosure rating and protects wires and cables |
| Gasketed mounting surfaces at both ends of arm maintain seal integrity |
| Enclosure and arm can be swiveled 330 deg with swivel stops available in 30 deg increments |