nVent HOFFMAN E1PB PB1 Pushbutton Enclosure, 3-1/2 in L x 3-1/4 in W x 2-3/4 in D, 1 Outlets, NEMA 12/IP65 NEMA Rating, Steel
Hoffman Push-Button Enclosures
25557
MFG #: E1PB
nVent HOFFMAN
115.04000
/ ea
nVent HOFFMAN Pushbutton Enclosure, Series: PB1, 3-1/2 in Length, 3-1/4 in Width, 2-3/4 in Depth, NEMA 12/IP65, Hinged Cover, 1 Outlets, Wall Mount, Steel, ANSI 61 Polyester Powder Painted, Gray
- http://www.hoffmanonline.com(Seller Home Page URL)
- Install Instructions 1 URL - 11015_9KDB1L2EVXUOW584.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - 23155002.pdf(Install Instructions 1 URL)
- Spec Sheet 1 URL - Hoffman_E10PB_Specification_Sheet.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - Spec-00357.pdf(Spec Sheet URL)
- Tech Drawing URL - C2663-C.gif(Tech Drawing URL)
- Warranty URL - terms-of-sale(Warranty URL)
- Applications
- Features
| Controls and Drives |
| 16 or 14 gauge steel, Seams continuously welded and ground smooth, Captivated cover screws thread into sealed wells, Bonding provision on cover, Grounding stud on body, Oil-resistant gasket, Factory stAed 4-way pushbutton holes, Enclosures with more than one column of pushbutton holes have internal detachable hinge to hold cover open during wiring, External welded-on mounting brackets for easy installation, 30.5-mm or 22.5-mm size holes |
| Seams continuously welded and ground smooth |
| Captivated cover screws thread into sealed wells |
| Grounding nut in body of enclosure |
| Bonding provision on cover |
| Oil resistant gasket |
| Factory stamped 4-way pushbutton holes |
| Enclosures with more than one column of pushbutton holes have internal detachable hinge to hold cover open during wiring, yet permit immediate removal |
| External wall mounting brackets |
| 16 or 14 ga steel |
| These pushbutton enclosures are designed to hold 30.5 mm or 22.5 mm pushbuttons and switches |
| 4.5 in L x 3.47 in W overall dimension |
| 16 or 14 ga steel |
| ANSI 61 gray polyester powder paint inside and out |