nVent HOFFMAN A30D2410 A9 Series Hazardous Location Enclosure, 30 in L x 24 in W x 10 in D, NEMA 9/IP60 NEMA Rating, Steel
Hoffman On-Demand
294477
MFG #: A30D2410
nVent HOFFMAN
11551.96000
/ ea
nVent HOFFMAN Hazardous Location Enclosure, Series: A9 Series, 30 in Length, 24 in Width, 10 in Depth, NEMA 9/IP60, Screw/Solid Cover, 21 in W x 27 in H Panel, Wall Mount, Steel, Polyester Powder Painted, Gray
- http://www.hoffmanonline.com(Seller Home Page URL)
- Install Instructions 1 URL - 11015_9KDB1L2EVXUOW584.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - stream_document.aspx?rRID=19773&pRID=4620(Install Instructions 1 URL)
- Install Instructions URL - stream_document.aspx?rRID=19773&pRID=4620(Install Instructions URL)
- Spec Sheet URL - Spec-00225.pdf(Spec Sheet URL)
- Tech Drawing URL - 87745249.gif(Tech Drawing URL)
- Warranty URL - terms-of-sale(Warranty URL)
- Applications
- Features
| Hazardous Environments |
| 0.19-in. (5-mm), .25-in. (6-mm) and .38-in. (10-mm) steel plate, Ends are .38-in. (10-mm) steel plate to provide a minimum of 3.50 full threads for conduit sizes through 2.00 in. (51 mm). (Class II enclosures must have minimum of 3.50 full threads at all conduit entrances. NEMA requires conduit entrances to be in top and/or bottom of enclosure. Tapped holes for conduit should have tapered pipe threads.), Covers are .25-in. (6-mm) thick to allow mounting of NEMA 9 pushbuttons and pilot lights, which require threaded holes (3/4-14 NPSM thread), Heavy duty cover hinges on enclosures when ?A? is 20.00 in. (508 mm) or more, Fiber gasket, mechanically attached to cover, assures dust-tight enclosure, Weldnuts or collar studs provided for mounting optional panel |
| 0.19 in (5 mm), 0.25 in (6 mm) and 0.38 in (10 mm) steel plate |
| Ends are 0.38 in (10 mm) steel plate to provide a minimum of 3-1/2 full threads for conduit sizes through 2 in (51 mm) |
| Class II enclosures must have minimum of 3-1/2 full threads at all conduit entrances |
| NEMA requires conduit entrances to be in top and/or bottom of enclosure |
| Tapped holes for conduit should have tapered pipe threads |
| Covers are 1/4 in (6 mm) thick to allow mounting of NEMA 9 pushbuttons and pilot lights, which require threaded holes (3/4 to 14 NPSM thread) |
| Heavy duty cover hinges on enclosures when "A" is 20 in (508 mm) or more |
| Fiber gasket, mechanically attached to cover, assures dust tight enclosure |
| Weldnuts or collar studs provided for mounting optional panel |
| Heavy duty hinges |