Wiremold® 8ATC2PBK 8IN PREWIRED SURF STYL
Poke-Through Assembled Units
977371
MFG #: 8ATC2PBK
Wiremold®
1024.85000
/ ea
For carpet, tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, (BZ) bronze, and (AL) aluminum. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Finish - Black
- Features
| DIE CAST ALUMINUM COVER, SLIDE EGRESS DOORS, 180 DEGREE COVER ROTATION, COVER DESIGNED TO SIT ON TOP OF FINISHED FLOOR SURFACE, 3 GANGS OF SERIVCES, 2 PREWIRED PRELOADED DUPLEX REC, JUNCTION BOX INCLUDED |
| Pre-wired assembly save on labor with a completely assembled, Pre-wired poke-thru with every power receptacle already installed |
| Recessed devices all power, communications and AV devices are recessed below floor level, providing maximum protection and device longevity |
| Step-on-it installation - quick and easy installation without the need for additional fasteners or a second installer |
| The cover opens a full 180 deg with two unique spring-loaded slide egress doors to keep wires, connections and people safe |
| A surface style cover is for mounting on top of the finished floor surface |
| Open system for expanded compatibility - accepts industry standard power, communications and A/V devices from most manufacturers including Legrand AVIP, Extron® and more |
| Includes 3-gang opening designed to fit A/V devices, including wall plate style transmitters, like the Crestron DM/TX series, without any additional parts |
| Plug load control up to 30 ft - tested with Pass & Seymour® wireless RF receptacles to control plug loads up to a distance of 30 ft when the cover is closed |
| Evolution™ series poke-thru devices use an intumescent material that maintains the fire rating of any floor for up to 2 hr |
| The poke-thru trim flanges are beveled so the slope is no greater than 1:2 ratio |