Wiremold® 6AT2BK 6IN UNWIRED FLUSH STYLE
Poke-Through Assembled Units
1018576
MFG #: 6AT2BK
Wiremold®
693.65000
/ ea
For tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, (BZ) bronze, and (AL) aluminum. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Includes one (1) 6TS Tile Shim. Finish - Black
- Catalog URL - Wiremold_6AT2AA_Catalog.pdf(Catalog URL)
- Material Composition - ROH_Legrand_ROHS_statement.pdf(Material Composition)
- ROHS Compliance URL(ROHS Compliance URL)
- Seller Home Page URL - wiremold.aspx(Seller Home Page URL)
- Spec Sheet URL - 8EA52BB68D3A4AA5B23758DA1D45B519.pdf(Spec Sheet URL)
- Features
| DIE CAST ALUMINUM COVER, SLIDE EGRESS DOORS, 180 DEGREE COVER ROTATION, COVER DESIGNED TO SIT FLUSH WITH FINISHED FLOOR SURFACE, 3 GANGS OF SERIVCES, JUNCTION BOX INCLUDED |
| Pre-assembled unwired poke-thru device connect to conduits and install now, but save configuration and plate choices for later |
| Recessed devices provide maximum protection - all power, communications and AV devices are recessed below floor level, providing maximum protection and device longevity |
| Step-on-it installation - quick and easy installation without the need for additional fasteners or a second installer |
| The cover opens a full 180 deg with two unique spring-loaded slide egress doors to keep wires, connections and people safe |
| Flush tile version cover assemblies - a flush style cover for tile applications allows the Evolution™ series poke-thru devices to be adjusted to the same level as the top surface of the floor covering |
| Open system for expanded compatibility - accepts industry standard power, communications and A/V devices from most manufacturers including Legrand AVIP, Extron® and more |
| Plug load control up to 30 ft - tested with Pass & Seymour® wireless RF receptacles to control plug loads up to a distance of 30 ft when the cover is closed |
| Evolution™ series poke-thru devices use an intumescent material that maintains the fire rating of any floor for up to 2 hr |