Square D™ LUB Self-Protected Starter Power Base, 5.71 in H x 1.77 in W x 4.96 in D
Motor Starter Controls
97201
MFG #: LUB12
Square D™
287.85000
/ ea
Schneider Electric LUB12 12A SELF-PROT.STR W/CNTRL TERMS,-25C to 70C,0.5HP115VAC - 2HP230VAC 3HP200/230VAC - 7.5HP460VAC - 10HP575/600VAC,12A Max,3,40-60hz,600VAC,Determined by Control Unit Selection,Determined by control unit,Din Rail or panel mount,Includes 1N/O and 1 N/C Auxiliary Contact.,Manual (Auto with accessories),Motor Starter Power Base,Open,Screw Clamp Terminals,TeSys,Tesys U simple motor starter,UL Listed - CSA Certified - CE Marked
- Video - https://youtube.com/embed/OaomPiHOkYk(Video)
- WEB BROCHURE URL - 115967977b38aa63fd29e8e8024eb8003e40dffe.pdf(WEB BROCHURE URL)
- WEB CATALOG URL - SquareD_LA7D901_Catalog.pdf(WEB CATALOG URL)
- WEB SELLER HOME PAGE URL - us(WEB SELLER HOME PAGE URL)
- WEB SPEC SHEET 1 URL - SquareD_LUB12_Datasheet.pdf(WEB SPEC SHEET 1 URL)
- WEB SPEC SHEET URL - 8d9708bec9c658508da4fceaef5ce3fe76110e71.pdf(WEB SPEC SHEET URL)
- WEB TECH DRAWING URL - afc1fb99081b7a15a5c1e9e49af25b6b88828af8(WEB TECH DRAWING URL)
- Applications
- Features
Motor Applications |
Suitability for isolation |
10 kA 500 V, 4 kA 690 V, 50 kA 230 V, 50 kA 440 V rated service breaking capacity |
130 mA at 24 VDC I maximum while closing with LUCA, LUCB, LUCC, LUCD, 140 mA at 24 VAC I maximum while closing with LUCA, LUCB, LUCC, LUCD, 150 mA at 24 VDC I maximum while closing with LUCM, 280 mA at 110 to 220 VDC I maximum while closing with LUCA, LUCB, LUCC, LUCD |
35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM control circuit, 50 ms at >= 72 V closing with LUCA, LUCB, LUCC, LUCD control circuit, 60 ms at 48 V closing with LUCA, LUCB, LUCC, LUCD control circuit, 70 ms at 24 V closing with LUCA, LUCB, LUCC, LUCD control circuit, 75 ms closing with LUCM control circuit operating time |
15000000 cycles mechanical durability, 60 cycles/min operating rate, 6 kV conforming to IEC 60947-6-2 rated impulse withstand voltage, 600 V conforming to CSA C22.2 No 14, 600 V conforming to UL 508, 690 V conforming to IEC 60947-1 3 rated insulation voltage |
Control circuit: 7.08-10.62 lbf.in- with screwdriver 0.2 in flat, control circuit: 7.08-10.62 lbf.in - with screwdriver 0.2 in Philips no 1, power circuit: 16.81-22.12 lbf.in- with screwdriver 0.24 in flat, power circuit: 16.81-22.12 lbf.in - with screwdriver 0.24 in Philips no 2 tightening torque |
2 W for control circuit with LUCA, LUCB, LUCC, LUCD, 1.7 W for control circuit with LUCM heat dissipation |
IP20 front panel and wired terminals conforming to IEC 60947-1, IP20 other faces conforming to IEC 60947-1, IP40 front panel outside connection zone conforming to IEC 60947-1 IP degree of protection |
TH conforming to IEC 60068 protective treatment |
1 kV serial mode 24 to 240 VAC conforming to IEC 60947-6-2, 1 kV serial mode 48 to 220 VDC conforming to IEC 60947-6-2, 2 kV common mode 24 to 240 VAC conforming to IEC 60947-6-2, 2 kV common mode 48 to 220 VDC conforming to IEC 60947-6-2 non-dissipating shock wave, 10 V conforming to IEC 61000-4-6 immunity to radio electric fields |
1.5 hp at 1 phase 115 VAC, 2 hp at 1 phase 230 VAC, 10 hp at 3 phase 575 VAC, 3 hp at 3 phase 230 VAC, 3 hp at 3 phase 200 VAC, 7.5 hp at 3 phase 460 VAC power rating |
-13 to 140 deg F with LUCM/-13 to 158 deg F with LUCA, LUCB, LUCC, LUCD |
INCLUDES 1N/O AND 1 N/C AUXILIARY CONTACT. |