| With integrated ground fault detection and AS-I data decoupling |
| Integrated data decoupling as the result, AS-interface is able to convey both data and power along a single line |
| Integrated ground fault detection the power supply units perform the reliable detection and signaling of ground faults according to IEC 60204-1 |
| The AS-interface voltage can be disconnected automatically in the event of a ground fault |
| Integrated overload detection an output overload is detected and reported over a diagnostics LED |
| Diagnostics memory any ground faults or overloads on the output side are stored in a diagnostics memory until the device is reset |
| Remote reset and remote signaling using relay contacts, a ground fault can be signaled and evaluated by a central controller and/or indicator light |
| Diagnostics LED 3 different LED indicate the status of the AS-interface power supply locally at the power supply unit |
| Ultra wide input range/2-phase connection the ultra wide input range of 120 to 500 V of the 8 A version means that the supply units can be used in virtually any network worldwide |
| In addition, this version dispenses with the need for an N conductor as the device can be connected directly between 2 phases of a network |
| Removable terminal blocks with spring-type connections for easy exchanging of devices, each power supply unit has three removable terminal blocks: for the input side, for the output side and for Signal/RESET connections |
| With integrated overload detection with AS-interface data decoupling |
