Schneider Electric TESYS™ LU2B12FU Reversing Power Base, For Use With Combination Motor Starters
Motor Starter Controls
572399
MFG #: LU2B12FU
Schneider Electric
567.73000
/ ea
Schneider Electric LU2B12FU 12A SELF-PR.REV.STR W/TERMS- LUCFU,-25C to 70C,0.5HP115VAC - 2HP230VAC 3HP200/230VAC - 7.5HP460VAC - 10HP575/600VAC,110/240V,12A Max,3,40-60hz,600VAC,Determined by control unit,Din Rail or panel mount,Manual (Auto with accessories),Motor Starter Power Base,Open,Reversing simple motor starter. 120VAC control, with signaling contacts,Screw Clamp Terminals,TeSys,Tesys U simple motor starter, Reversing starter base,UL Listed - CSA Certified - CE Marked
- http://www.schneider-electric.us/(WEB SELLER HOME PAGE URL)
- Video - https://youtube.com/embed/jpYkJKEWBas(Video)
- Video - https://youtube.com/embed/OaomPiHOkYk(Video)
- WEB SPEC SHEET URL - LU2B12FU(WEB SPEC SHEET URL)
- WEB TECH DRAWING URL - 7307ddd4f8e3dc5a2e691b4787c0ed37aa130e00(WEB TECH DRAWING URL)
- Applications
- Features
| Motor Applications |
| Suitability for isolation |
| 10 kA 500 V, 4 kA 690 V, 50 kA 230 V, 50 kA 440 V rated service breaking capacity |
| 1000 mA at 110 to 220 VDC I maximum while closing, 1000 mA at 110 to 240 VAC I maximum while closing typical current consumption |
| 150 ms with change of direction power circuit, 35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM control circuit, 70 ms closing with LUCA, LUCB, LUCC, LUCD control circuit, 75 ms closing with LUCM control circuit, 75 ms without change of direction power circuit operating time, 15 ms DC network duration of inrush phase |
| 15000000 cycles mechanical durability, 60 cycles/min operating rate, 6 kV conforming to IEC 60947-6-2 rated impulse withstand voltage, 600 V conforming to CSA C22.2 No 14, 600 V conforming to UL 508, 690 V conforming to IEC 60947-1 3 rated insulation voltage |
| Control circuit: 7.08-10.62 lbf.in- with screwdriver 0.2 in flat, control circuit: 7.08-10.62 lbf.in - with screwdriver 0.2 in Philips no 1, power circuit: 16.81-22.12 lbf.in- with screwdriver 0.24 in flat, power circuit: 16.81-22.12 lbf.in - with screwdriver 0.24 in Philips no 2 tightening torque |
| 2 W for control circuit with LUCA, LUCB, LUCC, LUCD, 1.7 W for control circuit with LUCM heat dissipation |
| IP20 front panel and wired terminals conforming to IEC 60947-1, IP20 other faces conforming to IEC 60947-1, IP40 front panel outside connection zone conforming to IEC 60947-1 IP degree of protection |
| TH conforming to IEC 60068 protective treatment |
| 1 kV serial mode conforming to IEC 60947-6-2, 2 kV common mode conforming to IEC 60947-6-2 non-dissipating shock wave, 10 V conforming to IEC 61000-4-6 immunity to radio electric fields |
| 1/2 hp at 1 phase 120 VAC, 2 hp at 1 phase 240 VAC, 10 hp at 3 phase 575 VAC, 3 hp at 3 phase 208 VAC, 3 hp at 3 phase 220/240 VAC, 7.5 hp at 3 phase 460 VAC power rating |
| -13 to 140 deg F with LUCM/-13 to 158 deg F with LUCA, LUCB, LUCC, LUCD |
| REVERSING SIMPLE MOTOR STARTER. 120VAC CONTROL, WITH SIGNALING CONTACTS |