Sandvik Coromant 6709531 CoroTurn® 107 Basic Shape Positive Turning Insert, CCMT 3(2.5)1-WM 4305, C-80 deg Diamond
CCMT Turning Inserts
1237294
MFG #: 6709531
Sandvik Coromant
18.54000
/ ea
Sandvik Coromant Turning Insert, Basic Shape Positive, Series: CoroTurn® 107, CCMT Insert, C-80 deg Diamond, 4 mm Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.1562 in Thickness, 0.3807 in Length, WM Chipbreaker, 0.0156 in Corner Radius, 0.1732 in Hole Dia, Manufacturer's Grade: 4305, ANSI Code: CCMT 3(2.5)1-WM 4305, ISO Code: CCMT 09 T3 04-WM 4305, 80 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T9315 grade functionally gradient substrate with fine structure |
| Relatively low cobalt content |
| Thick MT-CVD coating with a dominant Al2O3 layer |
| Highly versatile material with a balanced ratio of abrasion resistance and operative reliability |
| Special surface finish for coating |
| High cutting speeds |
| Continuous to slightly interrupted cut |
| Suitable for turning, with an indexing accuracy to ISO tolerance class-G and chipbreakers on one side only |
| FF2 chipbreaker - positive geometry with low cutting resistance |
| Improved cutting edge stability |
| Straight cutting edge |
| Very good chip control at low feed and depth of cut |
| High quality of surface finish |
| Increased performance and tool life in combination with the upgrade grades |
| Especially for small and slender components |
| 20 life cycle state |