Sandvik Coromant 6328003 CoroDrill® 880 Insert Drill, 1-1/8 in Drill, 1.5748 in Shank, 6.1328 in AOL, 3-3/8 in D Maximum Drill, 3
Indexable Drills
1239666
MFG #: 6328003
Sandvik Coromant
1061.59000
/ ea
Sandvik Coromant Insert Drill, Series: CoroDrill® 880, 1-1/8 in Drill, 1.5748 in Shank Dia, 3-3/8 in Maximum Drill Depth, 6.1328 in Overall Length, 3 Drill Depth by Dia Ratio, Insert Compatibility: 880-050305H-C-GM (MIIDM) and 880-0503W05H-P-GM (MIIDM), 3-3/8 in Flute Length
- Features
| Wiper geometry for best surface finish or higher feed possibilitiesEasy identification due to laser marking with drill insert and screw codes on the drill shankTwo or four cutting edges depending on drill diameterOptimized chip channels for accelerated chip evacuationOptimized geometries assure high performance in most materialsOptimized grades assure longer insert tool life |
| 28.575 mm Dia body |
| 0.5442 mm L point |
| 16000 r/min |
| 0 - 0.25 mm achievable hole tolerance |
| Axial concentric and radial coolant entry |
| Axial inclined coolant exit |
| 10 bar coolant |
| 40 - 60 deg insert screw clamping |
| EFW feed direction |
| SSK flute |
| 22 deg right hand helix flute |
| 5 deg rake orthogonal |
| 0 deg inclination, 2 flutes |
| 88 deg cutting edge |
| 105.7402 mm L chip flute |
| 20 life cycle state |
| 89.0016 mm L steel body |
| Features the new Sandvik Coromant innovation, Step technology |
| Closer hole tolerances |