Sandvik Coromant 5723776 CoroDrill® 880 Insert Drill, 1.062 in Drill, 1-1/4 in Shank, 6.5262 in AOL, 3.1859 in D Maximum Drill, 3
Indexable Drills
1165537
MFG #: 5723776
Sandvik Coromant
656.00000
/ ea
Sandvik Coromant Insert Drill, Series: CoroDrill® 880, 1.062 in Drill, 1-1/4 in Shank Dia, Cylinder Shank, 3.1859 in Maximum Drill Depth, 6.5262 in Overall Length, 3 Drill Depth by Dia Ratio, Insert Compatibility: 880-050305H-C-GM (MIIDM) and 880-0503W05H-P-GM (MIIDM), 3.1859 in Flute Length
- Applications
- Features
| For helical interpolation, boring, plunging, turning and drilling |
| Wiper geometry for best surface finish or higher feed possibilitiesEasy identification due to laser marking with drill insert and screw codes on the drill shankTwo or four cutting edges depending on drill diameterOptimized chip channels for accelerated chip evacuationOptimized geometries assure high performance in most materialsOptimized grades assure longer insert tool life |
| 31.75 mm Dia body |
| 60 mm L clamping |
| 0.5305 mm L point |
| 16000 r/min |
| 0 - 0.25 mm achievable hole tolerance |
| Axial concentric coolant entry |
| Axial inclined coolant exit |
| 10 bar coolant |
| 40 - 60 deg insert screw clamping |
| EFW feed direction |
| SSK flute |
| 22 deg right hand helix flute |
| 5 deg rake orthogonal |
| 29.8 mm H shank |
| 0 deg inclination, 2 flutes |
| 88 deg cutting edge |
| 100.74788 mm L chip flute |
| 20 life cycle state |
| 84.963 mm L steel body |