This switch is particularly competent for use in emergency stop applications as well as for ordinary circuit control |
The housing is made from high quality die-cast aluminum and powder coated painted yellow |
Manual reset with positive break contacts |
Gold plated contacts eliminate high resistance tarnishing |
May be mounted for right or left hand pull |
Captive terminal will accept (2) 14 AWG stranded wires |
Each switch is supplied with a fibreflex gasket which provides an oil tight seal upon installation |
For added protection against corrosive environments a neoprene gasket is available as an accessory item by ordering part number 02005-540 |
There are two 3/4 in NPT conduit openings |
The maximum cable recommended cable length is 200 FT with a maximum interval support of 10 FT |
The mechanical life of the switch is 150000 operations |
This switch can be installed on various conveyor installations and provides a constant access for emergency or normal stopping |
The rugged construction and long term reliability makes this cable pull switch well suited to function within various environments |
A600/N300 Heavy duty rating |
-40 to 85 deg C storage |
Operating temperatures at 0 deg C are based on the absence of freezing moisture and liquids |
6 A 110 - 120 VAC, 3 A 220 - 240 VAC, 1.5 A 440 - 480 VAC, 1.2 A 550 - 600 VAC at power factor 0.35 or less, 2.2 A 115 - 125 VDC, 1.1 A 230 - 250 VDC at inductive loads as specified in section 125 of industrial control devices, controllers and assemblies, ANSI/NEMA ICS 2-1988 |
60, 30, 15, 12 A inrush current, 15 lb trip force, 3.8 lb operating force between 10 ft supports |
2669 old catalog number |
Slack cable style, '6 A/1.2 A at 110 - 120/550 - 600 VAC, 2.2 A/1.1 A at 115 - 125/230 - 250 VDC |