Pass & Seymour® TradeMaster® 2095LA Duplex GFCI Receptacle, 125 VAC, 20 A, 2 Poles, 3 Wires, Light Almond
GFCI Receptacles
PDW~3377210
MFG #: 2095LA
Pass & Seymour®
19.75000
/ ea
Pass & Seymour® TradeMaster Duplex GFCI Receptacle, 125 VAC, 20 A, 1 hp, 60 Hz, 2 Poles, 3 Wires, NEMA 5-20R, Specification Grade, -35 to 66 deg C, Back and Side Wired Terminal, Thermoplastic, Light Almond, 4.2 in H x 1.72 in W x 0.98 in D
- http://www.legrand.us/(Seller Home Page URL)
- Install Instructions URL - 2095LA.aspx#res(Install Instructions URL)
- Spec Sheet URL - 2095LA.pdf(Spec Sheet URL)
- Video - https://www.youtube.com/embed/pIptvjPqYpA(Video)
- Video - https://www.youtube.com/embed/wWKZUjGeZcA(Video)
- Warranty URL - limited-extended-warranty.aspx(Warranty URL)
- Features
Safelock protection, auto ground, trip light indicator |
Class A rated GFCI |
5 +/-1 mA trio threshold, 20 A feed-thru capacity |
SafeLock protection if critical components are damaged and ground fault protection is lost, power to receptacle is disconnected |
Trip indicator light (red LED) |
Feed-thru wiring configuration allows GFCI to protect downstream receptacles |
Prevents line-load reversal miswire no power to the face or downstream receptacles if wired incorrectly |
Exceeds UL943 voltage surge requirements, survives 100x the required UL 3 kA/6 kV voltage surge test cycles |
Side or internal screw-pressure-plate back wire with 10 to 14 AWG solid or stranded copper wire |
High-impact-resistant thermoplastic construction |
Ground screw has a back wire clamp for easy installation, two back wire holes per terminal |
10 kA short circuit rating |
Mounting screws are shipped captive in the device and wallplate for easier installation |
Extra-long strap, button colors match the device face, dual-direction test and reset buttons |
Withstands 1500 V minimum dielectric, 4 to 6 mA trip level |
0.025 second nominal trip time |
95% maximum humidity, V-2 per UL-94 flammability rating |