Panduit® Fiber-Duct™ E4X4BL6 Type E Slotted Wall Wiring Duct, 4 in W x 4 in D, PVC
Slotted Wall Wiring Ducts
865717
MFG #: E4X4BL6
Panduit®
19.61000
/ ft
The 2x2 and 4x4 routing systems shall be used to route, segregate, and protect fiber optic and communication cabling. The solid wall routing systems should be UL Listed as an optical fiber channel for general purpose use. They shall be compliant with UL 2024A and NEC articles 770 and 800 when installed per instructions. The slotted wall channel and cover shall be UL Recognized. A full complement of fittings with a 2 in minimum bend radius, snap-on covers, and mounting brackets shall be available. Channel and fittings shall be manufactured from impact resistant and flame retardant (V-0) materials. Channel shall have non-slip snap-on covers that can be easily removed to allow access for moves, adds, and changes. Channel and fittings finish shall be pure color, resist scratches, dents, and not peel or corrode. Available system colors shall be yellow, orange, black, and light gray. A full complement of brackets shall be available for attaching system components to ladder rack, threaded rod, auxiliary framing, equipment racks, and raise floor pedestals.
- Applications
- Features
| (1)The Fiber-Duct™ 2X2 And 4X4 Routing Systems are Comprised of Channel, Fittings, and Brackets Designed to Segregate, Route, and Protect Fiber Optic Cable and Copper Cabling.(2) It is Suited for Data Center Applications where Cable is Routed from Distri |
| Channel and covers made from V-0 flame class rated material |
| Bend radius control in fittings helps prevent excessive bends in fiber optic and high performance copper cabling |
| Covers snap-on or off channel and fittings to enclose or gain access to system |
| Provides quick and easy access for moves, adds and changes |
| Channel and covers made from V-0 flame class rated material |
| It is suited for data center applications where cable is routed from distribution areas to equipment cabinets or racks |
| Used in Telco central offices to route fiber optic jumper cables between fiber distribution frames and equipment bays |
| It can be deployed over-the racks or in approved under floor applications |
| Fittings maintain a minimum 2 in bend radius to protect against signal loss due to excessive cable bends |
| 16 in2 internal area |
| External dimension: 4.14 in W x 4.12 in D |
| Rigid PVC (Channel), ABS (Fittings) |