Milwaukee® 4206-1 Adjustable Position Heavy Duty, 3/4 in Chuck, 2 hp, 4-11/16 in Drill to Center From Base, 350 rpm Spindle, 120 VAC
Drill Press or Radial Drill
348892
MFG #: 4206-1
Milwaukee®
1920.33000
/ ea
No job is too large for this heavy-duty drill press. The Adjustable-Position Electromagnetic Drill Press with 3/4 in Motor features the 4203 adjustable-position, variable-speed base and the 4262-1 3/4 in drill motor with 3-Jaw chuck. Built for production drilling, this 11.5-amp drill press can handle the toughest drilling jobs with up to a 3/4 in Twist Drill hole capacity, 4 in hole capacity with Steel Hawg® Cutters and 1-14 tapping capacity. The motor runs at 350 no-load RPM, geared low for maximum torque; base control panel offers variable speed control of motor RPM. . It can produce up to 1670 pounds of drill point pressure with a 1 in steel plate. Feedback speed control helps you maintain speed during operation. This unit features a 3/4 in chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling.
- Features
Features |
| Powerful 11.5 A motor, engineered for the toughest applications |
| Dual mount gear case with reverse mount permits tight quarter drilling |
| 3/4 in tap capacity, taps up to 1 in, 14 threaded holes |
| Maximum force, develops up to 1670 lb of drill point pressure with a 1 in steel plate |
| Solid state electronic switching, offers faster, smoother and quieter switching for a longer product lifespan |
| Line lockout, prevents tool from operating if voltage is restored to an interrupted line |
| Forward/reverse electronic feedback speed control, soft start and 6 ft safety chain |
| 9 ft fixed cord |
| Red/gray/black finish |
| Computer controlled reverse |
| Motor magnet lockout prevents de-mag during operation |
| Full wave holding power |
| Metal arm |
| Grounded construction |
| 4.74 in drilling depth |
| 15 in L x 4-1/4 in W base |