Marathon® EPBCP74 Enclosed Distribution Power Block, 600 VAC, 335 A, 9 Poles, 6 AWG to 400 kcmil Wire, Thermoplastic
Insulated Distribution Blocks
635350
MFG #: EPBCP74
Marathon®
627.11000
/ ea
Marathon® Enclosed Distribution Power Block, 600 VAC, 335 A, 9 Pole, 1 Primary Connections, 8 Secondary Connection, 6 AWG to 400 kcmil Wire, 10 kA Short Circuit Current Rating, Thermoplastic, Gray, 4.39 in H x 2.27 in W x 3.14 in D
- Features
| Electrical ratings: 335 AMP copper wire (Based on NEC table 310-16, 75 ° C column), CE rated voltage (Ui): 1000 VAC/VDC per IEC 60947-7-1, Rated impulse voltage (Uimp): 6000 V, Material group: IIIa, Pollution degree: 3, UL/CSA voltage rating: 600 VAC/VDC (UL 1059 class C, user group - general industrial), Factory and field wiring; Minimum enclosure size: 16 X 12 X 6 IN; Mechanical ratings: Flammability rating of insulator base: UL 94V-0 (Restricted wire rage); Tin plated aluminum and nickel plated steel terminal set screws; Zinc plated steel connector mounting screw; Panel mountable: 1/4 IN (M6) fasteners, torque to 30 - 40 LB-IN |
| 6 AWG to 400 kcmil (185 to 16 sq-mm) and 14 AWG to 3/0 (70 to 2.5 sq-mm) line wire range |
| (8) #2 to 14 AWG (35 to 2.5 sq-mm) load wire range |
| 600 V per UL 1059 & CSA 22.2 no 158, class B/C requirements |
| 1000 VAC/VDC per IEC 60947-7-1 (CE) |
| CU9 - 90 deg C connector terminal rating with copper or wire |
| Factory and field-wiring |
| V-0 flammability rating of insulator base per UL94 |
| -40 to 125 deg C insulator base temperature |
| Copper, tin plated connector |
| Aluminum, tin plated line terminal set screws |
| Steel, nickel-plated line terminal set screws |
| Zinc plated steel connector mounting screws |
| 42.4 nm for 400 kcmil to 2/0 AWG/1/0 to 2 AWG/4 to 6 AWG, 13.6 nm for 3/0 AWG/2/0 to 1 AWG, 9 nm for 2 to 6 AWG, 4.5 nm for 8 AWG/10 to 14 AWG torque rating |
| 1-7/16 in and 1 in L wire strip for line terminal |
| 400 to 300 kcmil and 3/0 to 4 AWG IP20 protection for line terminal |
| 8 mm and 6 mm hex terminal screw drive for line terminal |
| 400 kcmil to 6 AWG, 3/0 to 14 AWG line terminals |
| 9 nm for 2 to 4 AWG/6 AWG, 4.5 nm for 8 AWG/10 to 14 AWG torque rating |
| 5/8 in L wire strip for load terminal |
| 2 to 12 AWG IP20 protection for load termina |