Lithonia Lighting® CMRB6 CMRB 6 Occupancy Sensor, Infrared Sensor, 360 deg High Bay Coverage, Fixture Attached Mount

Occupancy or Motion Sensing Switch
417871 MFG #: CMRB6
Lithonia Lighting®
67.34000 / ea
Designed for mounting heights of up to 45 ft, the CMRB 6 High Bay 360~176; sensor provides Passive Infrared (PIR) occupancy detection over a 15-20 ft radial coverage pattern that overlaps the areas lit by a typical high bay fixture. This line voltage sensor switches loads directly without the need for a power pack. The CMRB 6 sensor mounts directly to the end of a lighting fixture through an extended 1/2 inch chase nipple, and is ideal for individual on/off control of T5/T8 fluorescent lighting. HID bi-level fixtures can also be controlled when the Start-to-High (SH) option is added to the CMRB 6. For multiple fixture control, multiple low voltage CMB 6, CMB 50, and/or HMB 10 Series High Bay sensors with power packs are recommended. For lower mounting height applications, CMRB 9 or CMRB 10 Series sensors are recommended.
QTY
  • Applications
  • Features
Auditorium, Entertainment, Theatrical, Foyer, Gymnasium, Loading Dock, Manufacturing, Retail and Warehouse, Storage Applications
100% digital pir detection, excellent rf immunity
360 deg coverage pattern
Self-contained relay, no power pack needed
No minimum load requirements
Compatible with electronic and magnetic ballasts, CFLs, LED and incandescent
Interchangeable hot and load wires, impossible to wire backwards
Pushbutton programmable
Non-volatile settings memory
Adjustable time delays
No field calibration or sensitivity adjustments required
Convenient test mode
100 hr lamp burn-in timer mode
1/2 in knockout
The CMRB 10 Series occupancy sensor mounts directly to the end of a pendant or surface mount fixture and utilizes the industry's leading Passive Infrared (PIR) technology to provide maximum viewing from the ceiling. The sensor is line powered and can switch loads directly without the need for a power pack. When mounted at 9 ft (2.74 m), this sensor views up to 28 ft (8.53 m) in all directions. Its circular coverage pattern is designed for walking motions; making it ideal for T-shaped intersections in corridors, or other areas where wall mounting a sensor is not practical. The CMRB 10 is also the best sensor for low ceiling applications. For example, when mounted at only 7 ft (2.13 m), the height of pick aisles in many distribution centers, the CMRB 10 provides a 32 ft (9.75 m) diameter pattern of coverage. In applications where detection of minor motion is als