Juno® TU8BL Trac-Master® TU Series 2-Circuit Trac System, 8 ft L x 1-3/8 in W x 13/16 in D, Extruded Aluminum
Track Rails
76740
MFG #: TU 8FT BL
Juno®
68.25000
/ ea
Trac-Master® TU-Series low-profile, 2-circuit trac sections can be surface or pendant mounted. They provide 2 separate 20-amp circuits from a single electrical feed or one 20-amp circuit controlled by 2 switches. The trac features an I-beam cross section that provides added strength and rigidity in suspended pendant applications and is compatible with a full range of feed, connector, and mounting accessories to satisfy virtually any requirement. Trac sections are available in 4, 8, and 12-foot lengths and accept all Trac-Master lamp holders. They are offered in white, black, or silver.
- Brochure URL - 10988_V30CT48L215UZ9IP.pdf(Brochure URL)
- http://www.lithonia.com(Seller Home Page URL)
- Install Instructions 1 URL - 10988_52VIKOXED8HW19ZM.pdf(Install Instructions 1 URL)
- Install Instructions URL - P773.pdf(Install Instructions URL)
- Line Drawing URL - 10988_NRPV2YUAWZO80B1G.gif(Line Drawing URL)
- Line Drawing URL - JU_TU-Trac_LA1.gif(Line Drawing URL)
- Spec Sheet 1 URL - Juno_TU12BL_Data_Sheet.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - 10988_8NBT5ZAOXPJ6FQUK.pdf(Spec Sheet URL)
- Spec Sheet URL - 10988_R0E7C6BATJU1KYNV.pdf(Spec Sheet URL)
- Applications
- Features
| Trac Lighting |
| 2-circuit capability offers the flexibility of individual circuit control for combining dual lighting effects along a single trac |
| Two 20 A circuits provide maximum switching flexibility in long trac runs, the increased capacity eliminates 50-percent of the feed points |
| Extruded aluminium I-beam channel construction |
| Injection molded polycarbonate dead-end with set screw |
| One-piece thermoplastic insulator ensures consistent conductor spacing for reliable electrical contact |
| Insulating bushings supplied at mounting hole locations to prevent shorts to ground |
| Debossed polarity line provides visual cue to proper trac, trac connector, and fixture alignment |
| Integral raceway in top of channel accommodates pendant mounting hardware and wire routing to electrical feed |
| Three 12 gauge solid copper conductors |
| Rated 20 A at 120 VAC |
| Connectors and feeds simply push into trac sections |
| Standard lengths may be cut to length by installer |
| Supplied with toggle bolts for surface mounting |