Juno® Air-Loc® IC926 Sloped Recessed Lighting Housing, Incandescent Lamp, IC Insulation, 120 VAC, Aluminum Housing
Recessed Lighting Housings
12058
MFG #: IC926
Juno®
68.77000
/ ea
The double wall new construction housing for use in 2/12 to 6/12 pitch slopes, 9 to 27 degs, can be completely covered with insulation. The housing is fully Air-Loc sealed to stop infiltration and exfiltration of air, reducing heating and cooling costs. Juno's patented Slope ceiling Down-Lites also direct light straight down, providing proper lighting from a sloped surface.
- http://www.junolightinggroup.com/(Seller Home Page URL)
- WEB BROCHURE URL - JUNO_IC1_Brochure.pdf(WEB BROCHURE URL)
- WEB INSTALL INSTR URL - IC & TC P5142.pdf(WEB INSTALL INSTR URL)
- WEB LINE DRAWING URL - JR-IC926-LA1.gif(WEB LINE DRAWING URL)
- WEB SPEC SHEET 1 URL - ID-SPE-v1-G4_1_0.pdf(WEB SPEC SHEET 1 URL)
- WEB SPEC SHEET URL - G4_1_0.pdf(WEB SPEC SHEET URL)
- Applications
- Features
Recessed Commercial; Recessed Residential; Damp Location; Wet Location w/appr Trims; IC Rated; Air-Loc |
Fully sealed Air-Loc® housing, double wall construction |
Oblique angle housing design holds trim flush with the ceiling |
Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range |
Medium base porcelain socket with nickel plated copper screw shell |
Shadow-free, knife edge trim design blends smoothly into the ceiling |
Pre-wired junction box with (5) 1/2 in and (1) 3/4 in knockouts with pryout slots, (4) non-metallic sheathed cable connectors and ground wire |
Angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics |
UL listed, cUL, CSA certified for through branch wiring, maximum (8) 12 AWG 90 deg C branch circuit conductors |
Real Nail® 3 bar hangers telescoping system with pre-installed removable nail for repositioning and integral T-bar mounting feature for suspended ceilings |
Real Nail® 3 bar hangers feature patented break away bars for tight joist spacing |
Energy efficient, sealed inner housing does not require separate ALG gasket |
Can be completely covered with insulation |
When used with Air-Loc® gasket, stops infiltration and exfiltration of air, reducing heating and air cooling costs |
22 ga die-formed galvanized steel mounting frame |
Inner housing is vertically adjustable to accommodate up to a 1 in ceiling thickness |
Access door for junction box accessibility |
For use in 2/12 to 6/12 (9 to 27 degree) pitch standard slopes |
Oval ceil opening |
A19/MR16/BR30/R30/PAR30/PAR30L/PAR38 lamps |