Hubbell Wiring Device-Kellems Twist-Lock® HBL2725SW Extra Heavy Duty Watertight Locking Flanged Inlet, 250 VAC, 30 A, 3 Poles, 4 Wires, Gray
Locking Flanged Inlets & Outlets
279599
MFG #: HBL2725SW
Hubbell Wiring Device-Kellems
209.78000
/ ea
Hubbell® Twist-Lock® Locking Flanged Inlet, Extra Heavy Duty Watertight, 250 VAC, 30 A, 3 hp, 3 Pole, 4 Wires, Grade: Industrial, IP66 Enclosure, -40 to 75 deg C, Screw Terminal, Thermoplastic, Gray, 3.75 in L x 2.44 in H
- http://www.hubbell-wiring.com/(Seller Home Page URL)
- Install Instructions 1 URL - 11456_MWP204UFZIYAOH1T.pdf(Install Instructions 1 URL)
- Install Instructions URL - IDW_DOCUMENT_1537663581402.pdf(Install Instructions URL)
- Line Drawing URL - 11456_B9X7QWT58VD4KACR.pdf(Line Drawing URL)
- Spec Sheet URL - 11456_MP14W5O6TAGVJFXH.pdf(Spec Sheet URL)
- Tech Drawing URL - IDW_DOCUMENT_1537666581966.pdf(Tech Drawing URL)
- Warranty URL - 11456_Y8PS6T0FNOGH3Q75.pdf(Warranty URL)
- Applications
- Features
| Extra Heavy Duty Industrial |
| Shrouded Watertight Construction |
| 1 piece, engineered thermoplastic housing is impact resistant for heavy duty industrial environments |
| Alignment arrows with lock and unlock symbols provide a visual indication that devices are properly connected |
| Closure cap is included for environmental seal when device is not in use |
| Withstands 2000 VAC minimum dielectric voltage |
| 10 AWG terminal accommodation |
| Clear polycarbonate terminal retainer |
| Natural white nylon body contact carrier |
| Gray Valox™ flanged casing |
| Stainless steel 302/304 multi-drive mounting screws |
| Molded-in or stamped on ratings |
| Permanently ink marked on product catalog number |
| Withstands 2000 VAC per UL 498 dielectric voltage |
| Max 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75% |
| 30 A 10 AWG wire size |
| Alignment arrows with lock and unlock symbols provide a visual indication that devices are properly connected |
| Neoprene EPDM blend closure cap and strap |
| 1-piece, engineered thermoplastic housing is impact resistant for heavy duty industrial environments |
| Screw mounting |
| 12 to 8 AWG wire size |
| Alignment arrows and lock and unlock symbols provide a visual indication that devices are properly connected |