FLIR® CM83 Power Clamp Meter, 599.9 A, 999.9 VAC, 99.99 kOhm, 20 Hz to 9.999 kHz, 1.45 in Jaw, LCD Display
Clamp Meters
894354
MFG #: CM83
Extech®
338.26000
/ ea
An industrial grade power clamp meter engineered with advanced power analysis and VFD filtering functions required by electrical troubleshooters.
- Features
| Vfd mode accurately analyzes non-sinusoidal waveforms and noisy signals in vfd-controlled equipment |
| Harmonics mode locates noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress |
| Phase rotation analyzes three-phase systems to measure power draw and verify if power is evenly balanced |
| Inrush current measures hard and soft start-up inrush current spikes while equipment is ramping up |
| Power factor and active power monitors power quality improvements, such as start-up realignments on three-phase equipment |
| Bright, dual led work lights make your work safer/easier in poorly lit locations especially useful when the lights are out or obstacles block your inspection targets |
| Rugged and shock-resistant double molded case design and extra thick rubber on the corners absorbs shock to enhance jobsite reliability and long haul durability |
| 3.999 mf capacitance |
| 32 ft maximum bluetooth range |
| 30 ohm continuity threshold |
| 599.9 aca maximum, 100 ms integration time inrush current |
| 0.4 - 0.8 v diode test |
| Meter link® compatibility embed electrical measurements into thermal images captured by meter link® enabled ir cameras for easier documentation |
| 1st - 25th order harmonics |
| 9.999 - 599.9 kW power rating |