Banner Engineering T18SP6LPQ Ez-Beam® T18 Photoelectric Sensor, Barrel Shape, 2 m Sensing, Visible red Sensing Beam, PNP Output
Photoelectric Retroreflective Sensors
13634
MFG #: T18SP6LPQ
BANNER®
110.29000
/ ea
Banner Engineering Ez-Beam® Photoelectric Sensor, Series: T18, Barrel, Retro Reflective Sensing Method, 2 m Sensing Range, Visible red Sensing Beam, 3 ms Response, PNP Output, 10 to 30 VDC, 30 mA, Quick Disconnect, LED Light Source, 10 to 60 Hz, 30 mm L x 30 mm W x 53.7 mm H, NEMA 6P/IP69K, -40 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
- Features
Barrel housing style; Features EZ-Beam technology, with specially designed optics and electronics for reliable sensing without adjustments on most models; Completely epoxy-encapsulated to provide superior durability, even in harsh sensing environments; QD models rated IP69K; Features T-style plastic housing with 18 MM threaded lens; Uses innovative dual-indicator system to take the guesswork out of monitoring sensor performance; Includes advanced diagnostics to warn of marginal sensing conditions or output overload (DC models); Supply protection circuitry: Protected against reverse polarity and transient voltages; Output protection circuitry: Protected against false pulse on power-up and continuous overload or short circuit of outputs |
Self-contained polarized retroreflective mode photoelectric sensor |
Less than 1 uA at 30 VDC off-state output leakage |
3 ms on/off response time |
680 nm visible red LED sensing beam |
Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
4-pin euro-style quick disconnect connection |
PBT polyester housing |
150 mA maximum (each) in standard wiring, less than 1 V at 10 mA DC, less than 1.5 V at 150 mA DC |
Light/dark operate, complementary PNP |
Featuring EZ-Beam technology to provide reliable sensing without the need for adjustments |
Completely epoxy-encapsulated barrel-mount sensors operate on dc supply voltage and withstand harsh sensing environments |
Advanced diagnostics to warn of marginal sensing conditions or output overload |
Available in opposed, retroreflective, diffuse and fixed-field modes |
2 green and yellow LED indicators: green on steady - power to sensor is on, green flashing: output is overloaded, yellow on steady - N.O. output is conducting , yellow flashing - excess gain marginal (1 - 1.5x) in light condition |
Protected against reverse polarity and transient voltages |
Protected against false pulse on power-up and continuous overload or short circuit of outputs |
10 - 60 Hz maximum, double amplitude 0.06 in, maximum acceleration 10g vibration |
T style plastic housing with 18 mm threaded lens mount |
Non-polarized retro and diffuse models (only) have a single-turn rear-panel sensitivity control (turn clockwise to increase gain) adjustments |
18 mm barrel diameter, Self-contained |