Banner Engineering SME312FPQD Mini-Beam® Expert™ SME312 Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam
Fiber Optic Block Style Sensors
128144
MFG #: SME312FPQD
Banner®
174.94000
/ ea
Banner Engineering Mini-Beam® Expert™ Fiber Optic Sensor, Series: SME312, Rectangle, Visible Red Sensing Beam, 0.5 ms Response, Bi-Polar NPN/PNP Output, 10 to 30 VDC, 45 mA, Quick Disconnect, LED Light Source, 76.2 mm L x 12 mm W x 30.7 mm H, NEMA 1/2/3/3S/4/4X/6/12/13/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
- Features
| Remote teach-mode input is provided |
| Less than 5 uA at 30 VDC off-state output leakage, less than 45 mA |
| Sensors will respond to either a light or a dark signal of 0.5 ms or longer duration, 1 kHz max |
| 650 nm visible red LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 5-pin euro-style quick disconnect connection |
| 100 ms repeatability |
| Less than 1 V at 10 mA and 2 V at 150 mA (PNP), less than 200 mV at 10 mA and 1 V at 150 mA (NPN) output saturation voltage |
| 150 mA maximum at 25 deg C derated to 100 mA at 70 deg C |
| Light/dark operate, bipolar (NPN and PNP) control output |
| Reinforced thermoplastic polyester housing |
| 1 sec delay at power-up |
| Plastic fiber |
| Adjustments - push-button teach-mode sensitivity setting, remote teach-mode input is provided |
| (2) LEDs, yellow and bicolor green/red |
| Stainless steel screws |
| Protected against reverse polarity and transient voltages |
| Protected against false pulse on power-up and continuous overload or short-circuit of outputs |