Banner Engineering SM312LVQD Maxi-Beam® SM312 Photoelectric Sensor, Rectangle Shape, 5 m Sensing, Visible Red Sensing Beam
Reflex-Reflective, Block Style
13514
MFG #: SM312LVQD
BANNER®
136.62000
/ ea
Banner Engineering Maxi-Beam® Photoelectric Sensor, Series: SM312, Rectangle, Retro Reflective Sensing Method, 5 m Sensing Range, Visible Red Sensing Beam, 1 ms Response, Bi-Polar Output, 10/30 VDC, 25 mA, Quick-Disconnect, LED Light Source, 12.2 mm L x 53.3 mm W x 30.7 mm H, NEMA 1/2/3/3S/4/4X/6/12/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90 Percent at 50 deg C
- Features
| Compact, modulated, highly repeatable sensors; Switch-selectable for light operate or dark operate; Includes banner's exclusive AID™ alignment system; Rugged, epoxy-encapsulated, totally encapsulated, o-ring sealing, and stainless steel screws construction; Physically and electrically interchangeable with 18 MM barrel-type photoelectric; Protected against reverse polarity, transient voltages and against false pulse on power-up and continuous overload or short-circuit of outputs; Controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover; The NPN (current sinking) output of DC MINI-BEAM sensors is directly compatible as an input to banner logic modules, including all non-amplified MAXI-AMP and MICRO-AMP modules, MINI-BEAMs are TTL compatible |
| Compact, modulated, self-contained retroreflective sensors |
| Switch-selectable for light operate or dark operate |
| Includes Banners exclusive AID™ alignment system, US patent number 4356393 |
| Highly repeatable 1 millisecond response |
| Rugged, epoxy-encapsulated, totally encapsulated, o-ring sealing, and stainless steel screws construction |
| Physically and electrically interchangeable with 18 mm barrel-type photoelectric |
| 15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel), both controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover adjustments |
| Exclusive, patented alignment indicating device system (AID, US patent no 4356393) lights a rear-panel mounted red LED indicator whenever the sensor sees a light condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate) |
| Industry standard mounting holes |
| Both sourcing and sinking outputs (150 mA max. each), continuous overload and short-circuit protected |
| Protected against false pulse on power-up and continuous overload or short-circuit of outputs |
| 18 mm barrel diameter |
| Self-contained non-polarized retroreflective mode photoelectric sensor |
| Less than 1 uA off-state output leakage, less than 25 mA |
| Sensors will respond to either a light or dark signal of 1 ms or longer duration, 500 Hz maximum |
| 650 nm visible red LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 4-pin integral euro-style quick disconnect connection |
| Reinforced thermoplastic polyester enclosure |
| Light/dark operate, bipolar (NPN and PNP) output, 150mA maximum each output at 25 deg C, derated to 100 mA at 70 deg C, (PNP output) less than 1 V at 10 mA and less than 2 volts at 150mA, (NPN output) less than 200 mV at 10mA and less than 1 V at 150 mA output saturation voltage |