or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
Banner Engineering SM2A912LVQD Valu-Beam® 912 Photoelectric Sensor, Rectangle Shape, 0.15 to 9 m Sensing, Visible Red Sensing Beam
Custom_Product_Images_Illustration
Banner Engineering SM2A912LVQD Valu-Beam® 912 Photoelectric Sensor, Rectangle Shape, 0.15 to 9 m Sensing, Visible Red Sensing Beam
SKU141340
MFGR #SM2A912LVQD
Your Cost: $341.00/ea
Banner Engineering Valu-Beam® Photoelectric Sensor, Series: 912, Rectangle, Retro Reflective Sensing Method, 0.15 to 9 m Sensing Range, Visible Red Sensing Beam, 4 ms Response, Switch Output, 24/250 VAC, 20 mA, 50/60 Hz, Quick-Disconnect, LED Light Source, 36.6 mm L x 35.6 mm W x 77.5 mm H, NEMA 1/2/3/3S/4/4X/12/13/IP66, -20 to 70 deg C Operating, Environmental Conditions: 90 Percent at 50 deg C
Banner Engineering Valu-Beam® Photoelectric Sensor, Series: 912, Rectangle, Retro Reflective Sensing Method, 0.15 to 9 m Sensing Range, Visible Red Sensing Beam, 4 ms Response, Switch Output, 24/250 VAC, 20 mA, 50/60 Hz, Quick-Disconnect, LED Light Source, 36.6 mm L x 35.6 mm W x 77.5 mm H, NEMA 1/2/3/3S/4/4X/12/13/IP66, -20 to 70 deg C Operating, Environmental Conditions: 90 Percent at 50 deg C
Amperage Rating 20 mA Catalog Number SM2A912LVQD Connection Type Quick-Disconnect Country of Origin US Enclosure Type NEMA 1/2/3/3S/4/4X/12/13/IP66 Environmental Conditions 90% at 50 deg C Frequency Rating 50/60 Hz Gross Weight Per Pack 0.4120 lb Light Source LED Operating Temperature -20 to 70 °C Sensing Method Retro Reflective Series 912 Size 36.6 mm L x 35.6 mm W x 77.5 mm H Standards CE Marked, CSA Certified, cULus Listed, RoHS Complaint UNSPSC 39121528 UPC 11 66248826577 UPC 12 66248826577 Voltage Rating 24/250 VAC Stock Status NONSTOCK Brand Banner® Manufacturer Banner Engineering Corp. Output Type Switch Response Time 4 ms Sensing Beam Red Laser Sensing Range 0.15 to 9 m Shape Rectangular Protected against transient voltages and false pulse on power-up; Stainless steel hardware; 912 Series ac sensors can be destroyed from overload conditions; Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load; The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts; Potentiometer located at rear of sensor Less than or equal to 5 V RMS at 750 mA load and less than or equal to 10 V RMS at 15 mA load on-state voltage drop Protected against transient voltages and false pulse on power-up Stainless steel hardware 912 Series ac sensors can be destroyed from overload conditions Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts Potentiometer located at rear of sensor 912 series non-polarized retroreflective mode photoelectric sensor Less than 1.7 mA off-state output leakage 4 ms on/off response time 650 nm visible red LED sensing beam Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity 3-pin mini-style quick disconnect connection Reinforced thermoplastic polyester enclosure Light/dark operate SPST SCR solid-state 2-wire output, 10 mA minimum load current, 750 mA to 50 deg C, 500 mA to 70 deg C maximum steady-state load capability, 4 A for 1 Sec (non-repetitive) inrush capability, less than or equal to 5 V RMS at 750 mA load and less than or equal to 10 V RMS at 15 mA load on-state voltage drop
content loaded
content loaded
content loaded
content loaded
- Attributes
- Documents & Resources
- Features
- Substitute Products
| Amperage Rating | 20 mA |
| Catalog Number | SM2A912LVQD |
| Connection Type | Quick-Disconnect |
| Country of Origin | US |
| Enclosure Type | NEMA 1/2/3/3S/4/4X/12/13/IP66 |
| Environmental Conditions | 90% at 50 deg C |
| Frequency Rating | 50/60 Hz |
| Gross Weight Per Pack | 0.4120 lb |
| Light Source | LED |
| Operating Temperature | -20 to 70 °C |
| Sensing Method | Retro Reflective |
| Series | 912 |
| Size | 36.6 mm L x 35.6 mm W x 77.5 mm H |
| Standards | CE Marked, CSA Certified, cULus Listed, RoHS Complaint |
| UNSPSC | 39121528 |
| UPC 11 | 66248826577 |
| UPC 12 | 66248826577 |
| Voltage Rating | 24/250 VAC |
| Stock Status | NONSTOCK |
| Brand | Banner® |
| Manufacturer | Banner Engineering Corp. |
| Output Type | Switch |
| Response Time | 4 ms |
| Sensing Beam | Red Laser |
| Sensing Range | 0.15 to 9 m |
| Shape | Rectangular |
| Protected against transient voltages and false pulse on power-up; Stainless steel hardware; 912 Series ac sensors can be destroyed from overload conditions; Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load; The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts; Potentiometer located at rear of sensor |
| Less than or equal to 5 V RMS at 750 mA load and less than or equal to 10 V RMS at 15 mA load on-state voltage drop |
| Protected against transient voltages and false pulse on power-up |
| Stainless steel hardware |
| 912 Series ac sensors can be destroyed from overload conditions |
| Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load |
| The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts |
| Potentiometer located at rear of sensor |
| 912 series non-polarized retroreflective mode photoelectric sensor |
| Less than 1.7 mA off-state output leakage |
| 4 ms on/off response time |
| 650 nm visible red LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 3-pin mini-style quick disconnect connection |
| Reinforced thermoplastic polyester enclosure |
| Light/dark operate |
| SPST SCR solid-state 2-wire output, 10 mA minimum load current, 750 mA to 50 deg C, 500 mA to 70 deg C maximum steady-state load capability, 4 A for 1 Sec (non-repetitive) inrush capability, less than or equal to 5 V RMS at 750 mA load and less than or equal to 10 V RMS at 15 mA load on-state voltage drop |