Positive opening safety contacts (IEC 60947-5-1) (not dependent upon springs); Mechanically coded actuators use two independent operating elements to minimize intentional tampering or defeat; Rotating head allows actuator engagement from front or back or either of two top positions; Insulated device (IEC 60947-5-1) on all models with plastic housings; Short circuit protection: 6 AMP slow blow, 10 AMP fast blow, recommended external fusing or overload protection; Cable entry: M16 x 1.5 threaded entrance; Wire connections: for switches with one or two contacts: stranded and solid - 20 - 16 AWG for one wire; Stranded: 20 - 18 AWG for two wires |
Positive opening safety contacts (IEC 60947-5-1) (not dependent upon springs) |
Mechanically coded actuators use two independent operating elements to minimize intentional tampering or defeat |
Rotating head allows actuator engagement from front or back or either of two top positions |
Choice of four standard actuators, special high extraction force actuator is available as option |
IEC IP65 switch housing rating may be increased to IEC IP67 with addition of screw to wiring chamber door |
Insulated device (IEC 60947-5-1) on all models with plastic housings |
6 A slow blow, 10 A fast blow short circuit protection, recommended external fusing or overload protection |
Glass fiber-reinforced polymide thermoplastic housing, silver-nickel alloy contact |
10 A at 24 VAC, 10 A at 110 VAC, 6 AMP At 230 VAC, 6 AMP At 24 VDC |
-30 to 80 deg C Operating |
1 NC contact configuration |
SI-QS-SSA-4 In-line stamped actuator |
1000000 operating cycles |
1/2 in NPT connection |