| Load bearing and rotating housing |
| Hinge device |
| Switch actuation |
| Quick disconnect cable connection |
| Wash-down rated |
| Safety switch is integrated into a highly robust PBT housing and screwed onto the fine-cast stainless steel or zinc die-cast hinge |
| Safety switching point is repositionable |
| Right-hinge quick disconnect, left-hinge quick disconnect, and right-angle quick disconnect hinge models available; switches can also be converted to operate from the opposite side |
| Switch components are protected from mechanical impact for superior performance to actuator-activated safety switches |
| Hinge operates to a full 270 deg range of motion; safety switching point (guard-closed position) is adjustable over the full 0 to 270 deg operating range |
| Stainless steel hinge supports a load of 1800 N |
| When properly interfaced or used with an appropriate controller, two SI-HG(Z)63 switches on an individual gate or guard can achieve safety category 4, per ISO 13849-1 (EN 954-1) |
| Typical applications include hinged covers and guards on machines and hinged gates in safety fencing systems |
| With quick disconnect facing down, switch is mounted on left side of hinge |
| 2 NC/1 no contact configuration |
| Micro M12 6-pin (dual key) quick disconnect cable connection |
| Switch mounted left side with quick disconnect down inline |
