Banner Engineering QS30EDVQ World-Beam® QS30E Photoelectric Sensor, Rectangular Shape, 1.4 m Sensing, Visible Red Sensing Beam
Photoelectric Diffuse Mode Sensors
387241
MFG #: QS30EDVQ
BANNER®
183.64000
/ ea
Banner Engineering World-Beam® Photoelectric Sensor, Series: QS30E, Rectangular, Diffuse Sensing Method, 1.4 m Sensing Range, Visible Red Sensing Beam, 1.8 ms Response, Bi-Polar Output, 10/30 VDC, 25 mA, Quick-Disconnect, LED Light Source, 10 to 60 Hz, 22 mm L x 33 mm W x 56.8 mm H, NEMA 6/IP67, -10 to 55 deg C Operating, Environmental Conditions: 95% at 50 deg C
- Features
Rectangular with M30 barrel housing style; Easy-to-set automatic expert-style static and dynamic TEACH options, multiple single-point set options, plus manual adjustment for fine tuning; Smart power-control algorithm to maximize performance in low-contrast applications; Easy-to-read operating status indicators, with 8-segment bar graph display; Powerful, highly collimated visible red sensing beam; Compact housing, mounting versatility - via popular 30 MM threaded barrel or side-mount; Protected against reverse polarity, over voltage, and transient voltages; Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up |
Smart power-control algorithm to maximize performance in low-contrast applications |
Easy push-button dark operate/light operate select, output off-delay, and operating speed setup |
Normal mode provides 1.8 ms sensing response with improved crosstalk avoidance routine (for two sensors) and improved fluorescent light immunity |
Compact housing, mounting versatility - via popular 30 MM threaded barrel or side-mount |
Selectable 30 ms off-delay |
Easy-to-read operating status indicators, with 8-segment bar graph display |
Teach button adjustments |
Protected against reverse polarity and transient over voltages |
Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up |
10 - 60 Hz maximum, double amplitude 0.06 in, maximum acceleration 10 gohm vibration |
150 mA maximum load, less than 200 mV at 10 mA and less than 1V at 150 mA maximum load (NPN), less than 1.25 V at 10 mA and less than 2 V at 150 mA(PNP) ON-state saturation voltage |
QS30 series expert diffuse mode photoelectric sensor |
Less than 50 uA at 30 VDC off-state output leakage |
0.3 ms (high-speed mode), 1.8 ms (normal mode) response time |
660 nm powerful, highly collimated visible red sensing beam |
Acrylic lens, 95 percent at 55 deg C (non-condensing) relative humidity |
5-pin integral euro-style quick disconnect connection |
ABS thermoplastic enclosure |
Light/dark operate, bipolar (NPN and PNP) output |
30 mm barrel diameter |