Banner Engineering Q10AP6DQ Q10 Photoelectric Sensor, Rectangular Shape, 500 mm Sensing, Infrared Sensing Beam, PNP Output
Photoelectric Diffuse Mode Sensors
148748
MFG #: Q10AP6DQ
BANNER®
128.36000
/ ea
Banner Engineering Photoelectric Sensor, Series: Q10, Rectangular, Diffuse Sensing Method, 500 mm Sensing Range, Infrared Sensing Beam, 3 ms Response, PNP Output, 10/30 VDC, 20 mA, Quick-Disconnect, LED Light Source, 42.4 mm H x 14.5 mm W x 11 mm D, NEMA 6P/IP67, -40 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
- Features
| 0 |
| Self-contained dc sensors in miniature right-angle housings |
| Only 11 mm thick |
| Epoxy-encapsulated circuitry; IP54 (NEMA5) construction, hermetically-sealed optics |
| Provides single-turn sensitivity adjustment on diffuse models, protected against reverse polarity |
| Protected against false pulse on power-up and continuous overload or short circuit of outputs overload trip point less than or equal to 220 mA, typical at 20 deg C |
| Opposed mode receivers and diffuse mode sensors have two LEDs (green and yellow) green glowing steadily - power to sensor is on, green flashing = output is overloaded, yellow glowing steadily - light is sensed, yellow flashing - marginal excess gain (1-1.5X) in light condition, Emitters have one green LED to indicate when power to sensor is on |
| Q10 Series miniature self-contained diffuse mode sensor |
| Less than 10 uA at 30 VDC off-state output leakage |
| 3 ms on/off response time |
| 880 nm infrared LED sensing beam |
| Glass lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 3-pin pico-style quick disconnect connection |
| Thermoplastic black ABS enclosure |
| Light operate |
| Potentiometer adjustments |
| Self-Contained |