Banner Engineering OTBVP6QDH Opto-Touch™ OTB Actuator Illuminated Optical Touch Button With Field Cover, 10 to 30 VDC
Optical Touch Buttons/Data Couplers
144905
MFG #: OTBVP6QDH
BANNER®
153.07000
/ ea
Banner Engineering Opto-Touch™ Optical Touch Button, Actuator Illuminated, Series: OTB, 10 to 30 VDC, 100 ms Response, Complementary PNP Output, Momentary Operating Action, 4-Pin Cable, M12, 30 mm Dia x 59.9 mm L, NEMA 1/3/4/4X/12/13/IP66, -20 to 50 deg C Operating, Threaded Mount, Environmental Conditions: 90% at 55 deg C Non-Condensing Maximum Relative Humidity, (2) Red Indicator LEDs, Thermoplastic Polysulfone, Black
- Features
| Zero-force activated photoelectric replacements for mechanical push buttons |
| Momentary action touch buttons with SPDT electromechanical relay |
| Optimized for easy mounting with a 30 mm threaded base |
| Ergonomic design eliminates hand, wrist and arm stress |
| Field covers included to prevent inadvertent activation from loose clothing, debris |
| Highly resistant to both single and mixed EMI and RFI noise sources |
| Protected against reverse polarity and transient voltages |
| 100 ms delay on power-up, outputs do not conduct at this time |
| Protected against false pulse on power-up and continuous overload or short circuit of outputs |
| Two indicator LEDs, one lights whenever power is applied, the other lights whenever the switch is activated |
| Electronics fully epoxy-encapsulated fiber reinforced polyester base |
| Threaded base has M30 x 1.5 external threads and 1/2 in NPSM internal threads |
| Base requires a 1-3/16 in diameter mounting hole (fits most standard automotive size jumbo legend plates and oil tight pushbutton holes) |
| Up to 100000 lux ambient light immunity |
| 150 mA maximum load each output |
| <1 VAC at 10 mA, <1.5 VAC at 150 mA om-state saturation voltage |
| Less than 1ua off-state leakage current |
| 4-pin M12 euro-style integral quick disconnect fitting |
| 30 mm diameter mounting thread base |
| Normally open/normally closed operation |