Banner Engineering Multi-Beam® PBAQ 3/4-Wire Power Block, Photoelectric Sensor, 105 to 130 VAC
Sensor Power Blocks, Bases & Receptacles
13319
MFG #: PBAQ
BANNER®
97.44000
/ ea
Model PBAQ is identical to model PBA except that the solid-state output contact is normally closed instead of normally open. It is used where it is necessary to have the load de-energize when something is sensed (e.g.- one shot pulse to de-energize load). When no timing logic is involved, model LM3 can program any power block for normally open or normally closed operation via the light/dark operate jumper. NOTE: model PBAQ is not compatible with logic module models LM5 and LM5-14. For normally closed on-delay logic, use PBA with LM5R and reverse the light/dark function.
- Features
50/60 Hz input |
3/4 A maximum (derated to 1/2 A at 70 deg C) output |
10 A for 1 sec or 30 A for one AC cycle (non-repeating) maximum inrush |
Less than 10 VAC at full load on-state voltage drop |
Less than 100 mA off-state leakage current |
Add 8.3 millisecond to the off-time response of the scanner block |
Range depends on sensor |
Wiring chamber |
2 m length cable connection |