Banner Engineering Mini-Beam® SM312FP Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, 1 ms Response Time

Fiber Optic Block Style Sensors
13452 MFG #: SM312FP
BANNER®
148.03000 / ea
Banner_SM312FP
Banner Engineering Mini-Beam® Fiber Optic Sensor, Rectangle, Visible Red Sensing Beam, 1 ms Response, Bi-Polar NPN/PNP Output, 10 to 30 VDC, 25 mA, Cable, LED Light Source, 44.5 mm L x 12 mm W x 30.7 mm H, NEMA 1/2/3/3S/4/4X/6/12/13/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
QTY
Add to Wishlist
  • Features
DC-operated fiber sensor
Less than 1 uA off-state output leakage, less than 25 mA
Sensors will respond to either a light or dark signal of 1 ms or longer duration, 500 Hz maximum
650 nm visible red LED sensing beam
Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity
2 m cable connection
0.3 ms repeatability
Light/dark operate, bipolar (NPN and PNP) output, 150mA maximum each output at 25 deg C, derated to 100 mA at 70 deg C, (PNP output) less than 1 V at 10 mA and less than 2 volts at 150mA, (NPN output) less than 200 mV at 10mA and less than 1 V at 150 mA output saturation voltage
Complimentary outputs
Industry standard mounting holes
Reinforced thermoplastic polyester housing
100 ms delay at power-up
Plastic fiber
15-turn slotted brass screw Gain (sensitivity) adjustment
Alignment indicating device system (AID) lights A rear-panel mounted red LED indicator
Stainless steel screws
Protected against reverse polarity and transient voltages
Protected against false pulse on power-up and continuous overload or short-circuit of outputs