Banner Engineering Maxi-Beam® RPBT Power Block, Photoelectric Sensor, 10 to 30 VDC, Bi-Polar NPN/PNP Output
Sensor Power Blocks, Bases & Receptacles
13441
MFG #: RPBT
BANNER®
122.74000
/ ea
Power block RPBT is the one most often used in low voltage dc applications. There are two solid state output switches (transistors), each rated at 1/4 amp. The NPN output at terminal #3 of the wiring base sinks current to the negative side of the power supply. The PNP output at terminal #4 sources current to the load from the positive side of the power supply. Both outputs may be used simultaneously. Response time of a MAXI-BEAM which uses model RPBT is the response time which is programmed at the sensor head (plus logic delays, if any).
- Features
20 mA exclusive of load current, 10% maximum ripple input |
250 mA continuous, short circuit and reverse polarity protected (both outputs) |
Less than 1 V at 10 mA and less than 2 V at 250 mA PNP output/ less than 200 mV at 10 mA and less than 1 V at 250 mA on-state voltage drop |
Less than 10 uA off-state voltage drop |
Range depends on sensor |
Wiring chamber |
2 m length cable connection |