BRK® CO511B Carbon Monoxide Detector Alarm, Photoelectric, (2) AA 1.5 VDC Battery, Audible Alarm/LED Display, 85 dB

Carbon Monoxide Detector Alarms
570367 MFG #: CO511B
First Alert® (BRK)
44.81000 / ea
BRK CO511B (model CO511) is a single station CO alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories, and other multifamily dwellings as defined in standard NFPA 101. BRK CO511B has been fully tested and complies with, UL2034, CSFM, NFPA 720 and NFPA 101 and other agencies that model their codes after the above agencies. It meets building codes where battery operated CO alarms are required along with wireless interconnect, voice with location and silence features and with model building codes published by the ICC. BRK CO511B is a state of the art wireless talking CO alarm designed to provide early warning of carbon monoxide. It features an electrochemical carbon monoxide sensor, an 85dB horn, a supervised 3V (2 AA batteries) power supply, a full function test switch and a silence feature. This combination alarm interconnects via wireless communication on a reliable and secure radio frequency communication of 915 MHz frequency with 65,000 security codes and 3 channel frequency hopping. You have a choice of 11 pre-programmed locations where a voice will announce the location and danger detected. When interconnected with other BRK Wireless Interconnect alarms it will also announce the danger and location detected of that alarm too. It operates on a Mesh Network; a two-way communication format that sends, receives and re-sends the alarm signals providing a more reliable network. It also features tamper resistant locking pins that lock alarm to the mounting bracket and battery drawer to prevent removal of battery or alarm. Perfect for apartment, dormitory or hotel applications. Designed for wall or ceiling mounting. Includes mounting anchors and screws.
QTY
  • Applications
  • Features
Single and or multiple station alarm specifically designed to detect carbon monoxide in residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings
BRK® wireless interconnect enabled alarm
Voice alarm with programmable location, programmable with up to eleven locations
Single button test/silence
2-silence can silence the low battery chirp for up to 8 hr or temporarily silence an unwanted nuisance alarm
RF interconnect reliable and secure radio frequency communication between alarms, 915 MHz frequency with 65000 security codes and 3 channel frequency hopping
Patented technology provides 360 deg of direct access to the smoke sensor
Perfect mount allows for easy alignment of alarm
Spread spectrum horn tone lower and varying frequency makes it easier for the elderly with normal aged related hearing loss to hear the horn
Alarm latch remembers which unit initiated an alarm, low battery latch to visually identifies unit in low battery condition
End of life signal provides audible notification alarms needs to be replaced
2-way communication format that sends, receives and re-sends the alarm signals providing a more reliable network
It is the most accurate sensor available as compared to other sensing technologies
Tamper-resistant locks alarm to mounting bracket to prevent removal of battery and/or alarm, perfect for apartment, dormitory or hotel applications
Electronically simulates carbon monoxide condition, causing the unit to alarm, press and hold test/silence button
Alarm reset automatic when carbon monoxide clears
Up to 18 units, RF or hardwired (needs SA520B bridge unit), with smoke, carbon monoxide, heat alarms and relays, maximum 12 smoke alarms interconnections