3M™ FP301 Heat Shrink Tubing, 1-1/2 in ID Expanded, 3/4 in ID Recovered, 0.04 in Wall THK Recovered, 100 ft L
Heat Shrink Tubing
865014
MFG #: 7000005975
3M™
3.15000
/ ea
3M™ heat shrink tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a variety of industrial and military applications. FP-301 tubing is split resistant, mechanically tough, easily marked and resists cold flow.
- Brochure URL - 11579_VSC1XBI6QGFERT0W.pdf(Brochure URL)
- Catalog 1 URL - 3M_051128_60132_Catalog.pdf(Catalog 1 URL)
- Catalog URL - 3M_051128_59779_Catalog.pdf(Catalog URL)
- http://www.3m.com(Seller Home Page URL)
- Line Drawing URL(Line Drawing URL)
- ROHS Compliance URL - 3M_054007_04672_RoHS.pdf(ROHS Compliance URL)
- Safety Data Sheet URL - mediawebserver?mwsId=SSSSSu9n_zu8l00xl8mSOY_eOv70k17zHvu9lxtD7xtBevSSSSSS-(Safety Data Sheet URL)
- Seller Home Page URL - Country(Seller Home Page URL)
- Spec Sheet URL - 11579_F9G2KJ5ET1L6U734.pdf(Spec Sheet URL)
- Spec Sheet URL - 3m-heat-shrink-tubing-fp-301-data-sheet-78-8131-7399-0-e.pdf(Spec Sheet URL)
- Tech Drawing URL - 11579_RFMOV1E4N9K7G0H8.pdf(Tech Drawing URL)
- Tech Drawing URL - mediawebserver?mwsId=66666UF6EVsSyXTt4XM6MXz6EVtQEVs6EVs6EVs6E666666--(Tech Drawing URL)
- Features
| Flexible, Polyolefin |
| Heat shrink tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications |
| Tubing comes in a bulk spool |
| When freely recovered, the tubing will shrink to 50% of its as supplied internal diameter |
| Recovered wall thickness is proportional to the degree of recovery |
| 13000 psi secant modulus |
| +/-5% longitudinal change |
| Non-corrosive and non-nutrient fungus resistance |
| 10 years shelf life |
| Used as a shrink fit electrical insulation over cable splices and terminations |
| 1 x 10^15 Ohm-cm volume resistivity |
| Low temperature flexibility no cracking, splitting for 4 hr at -55 deg C |
| Self-extinguish flammability property |
| 900 V/mil dielectric strength |
| Heat shock, no dripping, flowing, cracking, passes mandrel wrap test for 4 hr at 250 deg C |
| 175 % elongation for 336 hr at 175 deg C heat aging |
| 0.2% water absorption |
| 0.2% water absorption |