3M™ 8420 Cold Shrink Connector Insulator, 14.2 mm Min Dia, 48 mm Max Diameter, 152 mm L, 1400 PSI Tensile
Heat Shrink Tubing Connector Insulators
447104
MFG #: 7000058442
3M™
28.25000
/ ea
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M's proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation.
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - 11579_C09EOFSID52HNQ3A.pdf(Install Instructions 1 URL)
- Install Instructions URL - 8423-6-connector-insulator.pdf(Install Instructions URL)
- Line Drawing URL(Line Drawing URL)
- Safety Data Sheet URL - siojmjzydzdagletvzmc.pdf(Safety Data Sheet URL)
- Spec Sheet URL - 11579_5AC43JKOWTN679RH.pdf(Spec Sheet URL)
- Tech Drawing URL - 11579_5J1R9WMA0OS2Z8PB.pdf(Tech Drawing URL)
- Features
| Simple installation, requires no tools and accommodates a wide range of cable sizes |
| Copper conductor with polyolefin foam |
| No torches or heat required, good thermal stability |
| Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure |
| Excellent wet electrical properties |
| Tough rubber formulation withstands backfilling |
| Water-resistant, no mastic or tape required to seal |
| Resists acids and alkalis, resists ozone |
| Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated up to 1000 volts |
| Physical protection and moisture sealing for air-insulated connectors and lugs such as spacer cable and lug connections to bus bar |
| Insulation of secondary splices, copper or aluminum conductors, 2:1 shrink ratio |
| Relocation of service, dig-in repairs, sheath repairs, environmental sealing for communication and other non-electrical applications |
| Insulation of inline conductor transition connectors |
| -40 to 194 deg F temperature rating, 1 kV voltage rating |
| UniShield®, wire shield, non-shielded, tape shield cable |
| 6 in relaxed tube length, 2 in max connector length |
| 0.31 min cable dia for seal, 0.56 in max dia insulator cable or connector covers |
| 6 - 4 AWG conductor size |
| 1 conductor |
| 10/Case |