3M™ 5550 Cold Shrink Splice Kit, 5/8 kVAC, 4/0 AWG to 400 kcmil Conductor, 1 ft 9 in L Splice, EPDM
Insulated Splice Kit, 5-8 kV
48114
MFG #: 7000006047
3M™
1468.58000
/ ea
3M™ 5550 Series Cold Shrink Tape Inline Splice Kit is designed for splicing 5/8 kV-rated power cables with aluminum or copper conductors. This kit is designed to splice tape shield, wire shield, UniShield$$$$$$$$$$® or non-shielded cables.
- Full Eng Drawing URL - IDW_DOCUMENT_1479247131833.pdf(Full Eng Drawing URL)
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - 11579_A501LIFCTE2SGM74.pdf(Install Instructions 1 URL)
- Install Instructions URL - 3mtm-cold-shrink-rubber-splicing-kit-5552.pdf(Install Instructions URL)
- Safety Data Sheet URL - vv65lbghlabulrbt97kr.pdf(Safety Data Sheet URL)
- Spec Sheet URL - 11579_18583.pdf(Spec Sheet URL)
- Tech Drawing URL - 11579_18582.pdf(Tech Drawing URL)
- Features
| Provides splicing on tape shield, wire shield and UniShield® cables |
| This kit is suitable for use on solid dielectric cables, indoor or outdoor locations and direct burial applications |
| Insulator and jacket is made of EPDM for easy installation |
| Optional ground strap assembly GS-2 |
| 4/0 AWG - 500 kcmil copper, 4/0 AWG - 400 kcmil aluminum conductor range |
| 4.3 in copper max conductor length, 3.7 in aluminum max conductor length |
| 1400 PSI tensile strength |
| 750% elongation |
| 365 V/mil dielectric strength |
| 250 kcmil, 350 kcmil, 4/0 AWG, 400 kcmil, 500 kcmil copper conductor sizes |
| 3 Splices/Kit, 1/Case |