3M™ 5536A Cold Shrink QS-III Splice Kit, 35 kV, 350 to 1000 kcmil Conductor, 2 ft 11 in L Splice, Silicon Rubber
Insulated Splice Kit, 35 kV
449354
MFG #: 5536A
3M™
2245.57000
/ ea
3M™ Splice Kit, Cold Shrink QS-III, Series: 5536A, 35 kV, Longitudinally Corrugated (LC)/Tape Shield/UniShield®/Wire Shield Cable, 350 to 1000 kcmil Conductor, 1.24 to 2.07 in Insulation, 2 ft 11 in Splice Length, 1 Conductor, In-Line Connector, 105 to 140 deg C, Silicon Rubber, Black, 3.9 in Dia
- Brochure URL - 3m-cold-shrink-qs-iii-a-series-silicone-rubber-splice-brochure.pdf(Brochure URL)
- Safety Data Sheet URL - ydidqydm103nwfziajus.pdf(Safety Data Sheet URL)
- Seller Home Page URL - Country(Seller Home Page URL)
- WEB COMPLIANCE CERT URL - Scotch_054007_10083_Compliance_Certificate.pdf(WEB COMPLIANCE CERT URL)
- WEB INSTALL INSTR URL - qs-iii-5536a-splice-kit.pdf(WEB INSTALL INSTR URL)
- WEB LINE DRAWING URL(WEB LINE DRAWING URL)
- WEB SPEC SHEET URL - 3mtm-cold-shrink-qs-iii-inline-splice-kits-35-kv.pdf(WEB SPEC SHEET URL)
- WEB TECH DRAWING URL - mediawebserver?mwsId=66666UF6EVsSyXTtlxfVlxf6EVtQEVs6EVs6EVs6E666666--(WEB TECH DRAWING URL)
- Features
In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables |
Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface |
Designed for in-line splicing, feeder and distribution circuits, size transition splicing, direct burial installations and submerged locations |
Silicon rubber splice body provides good high and low temperature performance and the EPDM rubber jacket offers physical protection |
High voltage, production tested for partial discharge and AC ensure reliability |
Cold shrink design for quick and easy installation |
The cold shrink design fits type MV-90/MV-105 cables with copper conductors while ensuring a quick installation and better cable size transitions and 15,000 a rated for faults current protection |
Used with in-line splicing, feeder and distribution circuits, tape, wire, UniShield® and longitudinally corrugated (LC) shielded cables, transitions from shielded to neutral power cables, copper or aluminum conductors, size transition splicing, direct burial installations, submerged locations |
0.51 to 1.7 in OD connector |
6 in aluminum/copper compression length, 6-1/2 in copper compression length, 5.12 in shear bolt connector length |
1090 psi tensile strength |
610% elongation |
370 V/mil dielectric strength |
350 kcmil, 500 kcmil, 750 kcmil, 1000 kcmil conductor size |
1/case |